CONFERENCE

NO

                      RESEARCHER

                            TITLE

                         CONFERENCE

 1

Dimin, Mohd Fairuz and Se, SianMeng and Shaaban, Azizah

Urea Impregnated Biochar to Minimize Nutrients Loss in Paddy Soils.

In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4/12/2013, Kuantan, Pahang, Malaysia. (Submitted)

 2

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and ABD RAZAK , JEEFFERIE and Mohd Fairuz, Dimin

Effect Of Chitosan Gelatinization Temperature On Water Absorption And Water Retention Of Chitosan Based Urea Fertilizer.

In: International Conference on Mechanical Engineering Research, 1-3rd July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

 3

Mohamad, Noraiham and Mahamood, Mazlin Aida and Yaakub, Juliana and Abdul Razak, Jeefferie and Muchtar, Andanastuti and Shueb, Mohammed Iqbal and Kasim, Mohd Shahir and Mohd Abid, Mohd Asyadi Azam and Yaakob, Mohd Yuhazri and Mustafa, Nuzaimah and Toibah, Abd Rahim and Qumrul, Ahsan

Functionalisation Of Ethylene-propylene Copolymer (epm) By Melt Grafting Of Maleic Anhydride (mah) Using High Shear Internal Mixer.

In: International Conference on the Science and Engineering of Materials, 13-14 Nov 2013, Kuala Lumpur, Malaysia.

 4

Mohamad, Noraiham and Zainol, Nur Sharafina and ABD RAZAK , JEEFFERIE

Morphological & Mechanical Properties Of Polypropylene/epoxidized Natural Rubber Thermoplastic Vulcanizates Treated With Maleic Anhydried-grafted Polypropylene.

In: International Conference on Mechanical Engineering Research, 1-3th July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

 5

Mohd Abid, Mohd Asyadi Azam

Towards realization of high performance energy storage device: Nanostructuring CNT electrode.

In: Workshop on Advanced Energy Storage Materials & Devices (WAESD), 4-5 July 2013, UPNM, Kuala Lumpur.

 6

Mohd Abid, Mohd Asyadi Azam and Isomura , Kazuki and Fujiwara, Akihiko and Shimoda, Tatsuya

Direct growth of vertically aligned single-walled CNTs on conducting substrate and its electrochemical performance in ionic liquids.

In: International Symposium on Advanced Materials Science, 17 - 18 October 2013, JAIST, Ishikawa, Japan.

 7

Mohd Abid, Mohd Asyadi Azam and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Noraiham and Azizan, Mohd Arif and Abdul Manaf, Nor Syafira

Carbon Based Electrochemical Capacitor in 1M H2SO4 Electrolyte.

In: MUCET 2013, 2-3 December 2013, Kuantan.

 8

Shaaban, Azizah and Se, Sian Meng and Mohd Fairuz, Dimin and Hamid, Nadiah

Slow Pyrolysis And Characterization Of Surface Functional Groups For Biochar Derived From Rubber Wood Sawdust.

In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-4 July 2013, Kuantan, Pahang, Malaysia.

 9

Shaaban, Azizah and Sian Meng, Se and Merpati Mitan, Nona Mery and Dimin, Mohd Fairuz

Characterization of biochar derived from rubber wood sawdust through slow pyrolysis on surface porosities and functional groups.

In: The Malaysian International Tribology Conference 2013, MITC2013, 18-20 November 2013, Kota Kinabalu, Sabah.. (Submitted)

 10

T., Joseph Sahaya Anand and Chua, Kok Yau

Micro-structural Studies of Thermosonic Cu-Al Bonding Interface.

In: Joint International Conference on Nanoscience, Engineering and Management, 19-21 August 2013, Penang. (In Press)

 11

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz

Electro synthesised NiTe2 Thin Films with the Influence of Additives.

In: Joint International Conference on Nanoscience, Engineering and Management, 19-21, August, 2013, Penang. (In Press)

 12

Hambali, Arif and Ab. Rahman , Mahmood and Isa, Halim

The Use OF Analytical Hierarchy Process (AHP) In Product Development Process.

In: International Symposium on the Analytic Hierarchy Process 2013, 23 - 26 June 2013, Hotel Istana, Kuala Lumpur, Malaysia.

 13

Ito, Teruaki and Mohamad, Effendi and Salleh, Mohd Rizal

A Student Mobility Program through Cross Cultural and Technical Exposure.

In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

 14

Mohamad, Effendi and Teruaki, Ito and Dani , Yuniawan

A simulation-based approach to decision support for lean practitioners.

In: 20th ISPE International Conference on Concurrent Engineering, 2-6 September 2013, Melbourne , Australia.

 15

Mohamad, Effendi and Teruaki, Ito and Yuniawan, Dani

Lean Manufacturing Tools Training System.

In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 Nov 2013, Kitakyushu, Japan.

 16

Ng, K.C. and Chong, Kuan Eng and Goh, G.G.G.

Total Productive Maintenance Strategy in a Semiconductor Manufacturer: A Case Study.

In: 2013 Ieee International Conference On Industrial Engineering And Engineering Management, 3-4 Jun 2013, Bayview Hotel Langkawi.

 17

Ng, K.C. and Lim, C.P. and Chong, Kuan Eng and Goh, G.G.G.

Elimination of Waste through Value Add/Non value Add Process Analysis to Improve Cost Productivity in Manufacturing - A Case Study.

In: 2013 Ieee International Conference On Industrial Engineering And Engineering Management, 10-13 Dec2013, Bangkok, Thailand.

 18

Saptari, Adi and Poh Kiat, Ng

Applying Clockwise and Counterclockwise Torque Directions in Pinch Grips: A Descriptive Study.

In: 4th International Conference on Mechanical and Manufacturing Engineering 2013, Dec 17, 2013 - Dec 19, 2013, Equatorial Hotel, Bangi- Putrajaya.

 19

Yuniawan, Dani and Ito, Teruaki and Mohamad, Effendi

A proposal of total productive maintenance training system.

In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

 20

Jameel Abbas, Adnan and Minhat, Mohamad and Abd. Rahman, Md. Nizam

Improvement Performance Characteristics of CNC Turning Operation by Exploit Immune System's Properties.

In: 2nd International Conference on Computer Engineering and Mathematical Sciences (ICCEMS2013), 5-6 December 2013, Kuala Lumpur, Malaysia.

 21

Jaya, A. S. M. and Hashim, S.Z.M. and Haron, H. and Ngah, Razali and Muhamad, M.R. and Rahman, M. N. A.

Modeling of ANFIS in predicting TiN coatings roughness.

In: 5th International Conference on Computer Science and Information Technology (CSIT), 2013 , 27-28 March 2013, Amman.

 22

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Md. Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohamad, Noraiham and Raja, Izamshah

Prediction of Cutting Force in End Milling of Inconel 718.

In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang. (Submitted)

 23

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH

Assessment of environmental friendly application of biodegradable MQL coolant in end milling of Inconel 718.

In: 16th Conference of the European Roundtable on Sustainable Consumption and Production (ERSCP), 4-7 June 2013, Istanbul, Turki.

 24

 Minhat, Mohamad

Advanced Manufacturing: Technology Review On The Fabrication Of An Aircraft Component (fish-head).

In: National Conference on Engineering Technology 2013, 1 - 2 July 2013, Shah Alam Convention Centre (SACC, 1 - 2 July 2013, Shah Alam Convention Centre (SACC). (In Press)

 25

 Minhat, Mohamad

CNC Machine System Via STEP-NC Data Model and Lab VIEW Platform for Milling Operation.

In: 2013 IEEE Conference on Open Systems (ICOS), December 2-4, 2013, Sarawak, Malaysia.

 26

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad

A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol.

In: 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4-6, 2013, Johor Bahru, Malaysia.

 27

Mohd , amran and Salmah, Siti and Hussein, Nur Izan Syahriah and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri

Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process.

In: Malaysian International Tribology Conference , November 18-20, 2013, Kota Kinabalu, Sabah, Malaysia.

 28

Mohd , amran and Salmah, Siti and Zaki, M and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Mohd Shahir, Kasim and Mohd Amri , Sulaiman

Study the effects of pressure on warpage of dumbbell plastics part in injection moulding machine.

In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

 29

Sivarao, Subramonian and Aziz, Alif and Hambali, A and Salleh, Mohd Rizal and T.J.S, Anand and Raja, Izamshah and Nur, izan and A.R.M, Warikh

Super Energy Saving Locking System (ses- Lock).

In: Program Pemindahan Ilmu (KTP01), 21 Ogos, Bangi Malaysia.

 30

Sivarao, Subramonian and Fairuz, Dimin and Faris, Nik and Hambali, A and Sivakumar, Dhar Malingam and Sapuan, S.M

Analytical Hierarchy Process for Design Selection of Micro Hot-Marking Tool.

In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 30-31 October 2013, Melaka, Malaysia.

 31

Sivarao, Subramonian and Qumrul, Ahsan and Mohd Amran, Md Ali and T.J.S, Anand and RAJA ABDULLAH, RAJA IZAMSHAH and Aziz, Alif

Friction Performonce Anolysis of woste Tire Rubber Powder Reinforced polypropylene using pin-on-Disk Tribometer.

In: Malaysian International Tribology Conference ( MITC), November 18-20, Kota Kinabalu, Sabah.

 32

Zahra , Hosseini and Hamed , Fazlollahtabar and Iraj , Mahdavi and Minhat, Mohamad

A Mathematical Model for Waste Management in Reverse Supply Chain.

In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, January 7 – 9, 2014, Bali, Indonesia. (Submitted)

 33

Abdullah, Lokman And Jamaludin, Zamberi And Rafan, Nur Aidawaty And Jamaludin, Jailani And Tsung Heng, Chiew

Assessment on tracking error performance of Cascade P/PI, NPID and N-Cascade controller for precise positioning of xy table ballscrew drive system.

In: International Confernce on Mechatronics (ICOM 2013), 2 - 4 July 2013, Vistana Hotel Kuala Lumpur, Malaysia.

 34

Abdullah, Lokman And Jamaludin, Zamberi And Salleh, Mohd Rizal And Abu Bakar, Baharudin And Maslan, Mohd Nazmin And Tsung Heng, Chiew And Rafan, Nur Aidawaty

Design and Analysis of Self-tuned Nonlinear PID Controller for XY Table Ballscrew Drive System.

In: 2nd International Symposium on Computer, Communication, Control and Automation (3CA 2013), 1 - 2 December 2013, Holiday Inn Atrium, Singapore.

 

                            JOURNAL

NO

                     RESEARCHER

                              TITLE

                           JOURNAL

 1

Abd Manaf, Mohd Edeerozey

Incorporation of low-mass compound to alter the orientation birefringence in cellulose acetate propionate.

Optical Materials, 35 . pp. 1443-1448. ISSN 0925-3467

 2

Abd Manaf, Mohd Edeerozey

Optical anisotropy in solution-cast film of cellulose triacetate.

Cellulose, 20 . pp. 83-96. ISSN 1572-882X

 3

Abd Manaf, Mohd Edeerozey

Optical Properties of Cellulose Esters and Applications to Optical Functional Films.

In: Pulp production and processing: From papermaking to high-tech products. Smithers Rapra Technology Ltd, United Kingdom, pp. 391-411. ISBN 978-1-84735-633-8

 4

Abd Razak , Jeefferie And Mohamad, Noraiham And Ab Maulod, Hairul Effendy

Processability of polypropylene/multiwalled carbon nanotube nanocomposites via direct melt compounding.

Journal of Elastomers & Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

 5

Hambali, Arif and T., Joseph Sahaya Anand and Sivarao, Subramonian

Finite Element Analysis of Conceptual Lumbar Spine for Different Lifting Position.

World Applied Sciences Journal, 21 . pp. 68-75. ISSN 1818-4952

 6

Jariah, Mohamad Juoi and Zulkifli, Mohd Rosli and Toibah, Abd Rahim and Siti Rahmah, Shamsuri

Physical and Mechanical properties of glass composite material made from incinerated scheduled waste slag and SLS waste Glass.

Advanced Material Research . pp. 280-288. ISSN 1022-6680

 7

Jeefferie, Abd Razak and Mohamad, Noraiham and Ab Maulod, Hairul Effendy

Processability of Polypropylene-Multiwalled Carbon Nanotubes (PP/MWCNTs) Nanocomposites via Direct Melt Compounding.

Journal of Elastomer and Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

 8

Juoi, J.M. and Arudra, D. and Rosli, Z.M. and Hussain, K. and Japper Jaafar , A

Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass.

Journal Non-Crystalline Solids, 367 (1). pp. 8-13. ISSN 0022-3093

 9

 Lau, Kok Tee

Effect of Charging Agents on Electrophoretic Deposition of Coarse Titanium Particles.

Journal of The Australian Ceramic Society . pp. 108-115. ISSN ISSN 0004-881X

 10

 Lau, Kok-Tee

Effect of Charging Agents on Electrophoretic Deposition of Coarse Titanium Particles.

Journal of The Australian Ceramic Society Volume 49[2], 2013, 108 – 115, 49 (2). 108 - 115. ISSN ISSN 0004-881X

 11

Lum, YipHing and Shaaban, Azizah and Mitan, NonaMerryM. and Dimin, MohdFairuz and Mohamad, Noraiham and Hamid, Nadiah and Se, SianMeng

Characterization of Urea Encapsulated by Biodegradable Starch-PVA-Glycerol.

Journal of Polymers and the Environment, 21 (4). pp. 1083-1087. ISSN 1566-2543

 12

Mohamad, Noraiham And Abdul Hamid, Nor Nadiah And Abd Razak , Jeefferie And Dimin, Mohd Fairuz

Effect Of Chitosan Gelatinization Temperature On Water Absorption And Water Retention Of Chitosan-based Urea Fertilizer.

International Journal of Automotive and Mechanical Engineering , 8 (July-December 2013). pp. 1357-1366. ISSN 2229-8649 (Print); 2180-1606 (Online)

 13

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Yaakub, Mohd Yuhazri and Abdollah, Mohd Fadzli and Abd Manaf, Mohd Edeerozey

Mechanical and morphological properties of polypropylene/epoxidized natural rubber blends at various mixing ratio.

Procedia Engineering . pp. 1-6. ISSN 1877-7058 (Unpublished)

 14

Mohamad, Noraiham and Zainol, Nur Sharafina and YAAKOB, MOHD YUHAZRI and ABD RAZAK , JEEFFERIE

Morphological And Mechanical Properties Of Polypropylene/epoxidized Natural Rubber Thermoplastic Vulcanizates Treated With Maleic Anhydride-grafted Polypropylene.

International Journal of Automotive and Mechanical Engineering , 8 ((July- Dec 2013)). pp. 1305-1315. ISSN 2180-1606 (online) 2229-8649 (print)

 15

Mohamad Juoi, Jariah and Nazari , Farahani Irna and Mitan, Nona Merry Merpati and Shaaban, Azizah

Rheological Properties of Urea-CaLS Mixture for Urea Fertilizer Granulation.

Advanced Materials Research , Vol. 701 . pp. 329-332. ISSN 1022-6680

 16

Mohd Abid, Mohd Asyadi Azam

Significant Capacitance Performance of Vertically Aligned Single-Walled Carbon Nanotube Supercapacitor by Varying Potassium Hydroxide Concentration.

International Journal of Electrochemical Science (IJES), 8 (3). pp. 3902-3911. ISSN 1452-3981

 17

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin

Development of High Performance Electrochemical Capacitor: A Systematic Review of Electrode Fabrication Technique Based on Different Carbon Materials.

ECS Journal of Solid State Science and Technology . M3101-M3119. ISSN 2162-8777

 18

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin and Talib, Elyas

Aligned carbon nanotube from catalytic chemical vapor deposition technique for energy storage device: a review.

Ionics, 19 (11). pp. 1455-1476. ISSN 0947-7047 (Print); 1862-0760 (Online)

 19

Mohd Abid, Mohd Asyadi Azam and Mohd Warikh, Abd Rashid

X-ray and morphological characterization of Al-O thin films used for vertically aligned carbon nanotube growth.

Advanced Materials Research . pp. 213-218. ISSN 10226680

 20

Mohd Abid, Mohd Asyadi Azam and Rosle, Muhammad Firdaus

Electrochemical Analyses of Carbon Nanotube Based Supercapacitor in 1M LiPF6 Organic Electrolyte.

International Journal of Electroactive Materials, 1 . pp. 55-59. ISSN 2289-179X

 21

Mohd Abid, Mohd Asyadi Azam and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah

Nanostructuring Ultra-thin Co Films to Active Catalyst Particles for Vertically Aligned Single-Walled CNT Growth.

Procedia Engineering , 68 . pp. 566-571. ISSN 1877-7058

 22

Mohd Rosli, z.m.rosli and Kwan, Wai Loon and Jariah, Mohamad Juoi and Nafarizal , Nayan and Zainab , Mahamud and Yusliza, Yusuf

Characterization of TiAlBN Nanocomposite Coating deposited via Radio Frequency Magnetron Sputtering using Single Hot-Pressed Target.

Advanced Materials Research, Vol. 626 (2013) . pp. 298-301. ISSN 1022-6680

 23

Mohd Rosli, z.m.rosli and Zainab , Mahamud and Jariah, Mohamad Juoi and Nafarizal, Nayan and Kwan, Wai Loon and Yusliza, Yusuf and Hairul Effendy, Maulud

Corrosion behavior of AZ91 Mg-Alloy coated with AlN and TiN in NaCl and Hank’s solution.

Advanced Materials Research . pp. 275-279. ISSN 1022-6680

 24

Mohd Rosli, Zulkifli and Mohamad Dom, Adibah Haneem and Jauhari, Iswadi and Mohd Khalid, Hidayah

Development of hydroxyapatite layer on superplastic Ti-6Al-4V for biomaterials applications.

Advanced Materials Research . pp. 339-343. ISSN 1022-6680

 25

Mohd Rosli, ZULKIFLI and Dilip, Arudra and Jariah, Mohamad Juoi and Toibah, Abd Rahim and Siti Rahmah, Shamsuri and Azuraien, Japper Jaafar

Physical And Mechanical Properties Of Glass Composite Material Made From Incinerated Scheduled Waste Slag And Sls Waste Glass.

Advanced Materials Research . pp. 280-288. ISSN 1022-6680

 26

Mohd Rosli, Zulkifli And Jariah, Mohamad Juoi And Dilip, Arudra And Kalthom, Hussain And Azuraien, Japper Jaafar

Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass.

Journal of Non-Crystalline Solids . pp. 8-13. ISSN 0022-3093

 27

Mohd Rosli, Zulkifli and Joseph Sahaya Anand, T and S., Shariza and Azizah, Shaaban and Sivarao, Subramonian and Radzai, Said and Kamaruzaman, Jusoff and Thiru, S

Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route.

World Applied Sciences Journal . pp. 60-67. ISSN 1818-4952

 28

Mohd Rosli, Zulkifli and yusliza, yusuf and Jariah, Mohamad Juoi and Zainab , Mahamud and Kwan, Wai Loon

Ti6Al4V Surface Hardness Improvement by Duplex Coating.

Advanced Materials Research . pp. 370-374. ISSN 1022-6680

 29

Mohd Rosli, Zulkifli and Yusuf, Y. and Juoi, J. M. and Kwan, Wai Loon and Zainab , Mahamud

Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy.

Pertanika J. Sci. & Technol . pp. 45-58. ISSN 0128-7680

 30

Sivarao, Subramonian And S.thiru,, Chitrambalam And T., Joseph Sahaya Anand And Mariana , Yusof

Establishing a Hybrid Laser Lathing Technology.

World Applied Sciences Journal, 21 . pp. 53-59. ISSN 1818-4952

 31

T., Joseph Sahaya Anand and Chua, Kok Yau

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads.

Current Applied Physics, 13 (8). pp. 1674-1683. ISSN 1567-1739

 32

T., Joseph Sahaya Anand and Chua, Kok Yau and Cher, Chia Lee and Hng, May Ting

XRD analysis of Cu-Al interconnect intermetallic compound in an annealed micro-chip.

Advanced Materials Research, 620 . pp. 166-172. ISSN 10226680

 33

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz and S., Shariza

Effect of Additives on Optical Measurements of NiSe2 Thin Films.

Procedia Engineering , 53 . pp. 555-561. ISSN 1877-7058

 34

T., Joseph Sahaya Anand and Nor Hamizah, Bt. Mazlan

Electro synthesized MoTe2 Thin Films and their semiconductor studies towards Photoelectrochemical Cell.

Advanced Materials Research, 845 . pp. 392-397. ISSN 1662-8985

 35

T., Joseph Sahaya Anand and Rajes, KM Rajan and Mohd Zaidan , Abdul Aziz

Electrosynthesized NiS2 thin films and their optical and semiconductor studies.

Reports in Electrochemistry, 3 . pp. 25-29. ISSN 2230-4096

 36

T., Joseph Sahaya Anand and S., Shariza

Optical Studies of Transition Metal Chalcogenide MoSe2 Thin Films

Far East Journal of Electronics and Communications, 11 (1). pp. 57-66. ISSN 0973-7006

 37

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli and Azizah, Shaaban and Sivarao, Subramonian and Mohamad, Radzai Said and S., Thiru

Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route.

World Applied Sciences Journal, 21 . pp. 60-67. ISSN 1818-4952

 38

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar

Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body.

Current Research in Malaysia (CREAM), 2 (2). pp. 61-72. ISSN 2231–8305

 39

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar

Mechanical Properties Of Intermetallic Nickel Aluminides (ni3al).

Far East Journal of Electronics and Communications, 11 (1). pp. 47-56. ISSN 0973-7006

 40

Yaakob, Mohd Yuhazri And Amir Mohamed, Kamarul And Abdul Hamid, Rahimah And Hasoloan , Haery Ian Pieter And Yahaya, Saifudin Hafiz

An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Daytime.

Applied Mechanics and Materials , 315 (2013). pp. 783-787. ISSN 1662-7482

 41

Yaakob, Mohd Yuhazri And Amir Mohamed, Kamarul And Hasoloan , Haery Ian Pieter And Yahaya, Saifudin Hafiz And Raja Abdullah, Raja Izamshah

An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Night.

Applied Mechanics and Materials , 315 (2013). pp. 788-792. ISSN 1662-7482

 42

Yusuf, Y. and Juoi, J. M. and Rosli, Z. M. and Kwan , W. L. and Mahamud, Z.

Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy.

Pertanika Journal of SCience and Technology, 21 (1). pp. 45-58. ISSN 0128-7680

 43

Abdul Hamid, Rahimah And Yaakob, Mohd Yuhazri And Hasoloan , Haery Ian Pieter

Design and Analysis of a New Natural Illumination Device through Lumen Method Approach.

Applied Mechanics and Materials , 315 (2013). pp. 715-719. ISSN 1662-7482

 44

Akmal, Suriati

Methodology for Developing Manufacturing Process Ontologies.

Journal of Japan Industrial Management Association . pp. 303-316. ISSN 0386-4812

 45

Masni-Azian, Akiah and Choudhury, Imtiaz Ahmed and Haeryip , Sihombing and Yuhazri, Yaakob

Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray.

Advanced Materials Research, 626 . pp. 542-546. ISSN 978-3-03785-571-3

 46

Samat, Khairul Fadzli and Hussein, Mohamed and M.R., Safizadeh

Analysis of Single Actuator for Rehabilitation Device of Leg Weakness.

Applied Mechanics and Materials . pp. 1021-1025. ISSN 1660-9336

 47

Yahaya, Saifudin Hafiz and Sihombing, Haeryip and Yaakob, Mohd Yuhazri

G2 Bezier-Like Cubic as the S-Transition and C-Spiral Curves and Its Application in Designing a Spur Gear Tooth.

Australian Journal of Basic and Applied Sciences . pp. 109-122. ISSN 1991-8178

 48

 Perumal, Puvanasvaran

People Development System for Lean Process Management Implementation.

Penerbit UTeM, UTeM. ISBN 9789670257273

 49

 A. P., Puvanasvaran

Consideration Of Demand Rate In Overall Equipment Effectiveness (oee) On Equipment With Constant Process Time.

Journal of industrial engineering and management, 6 (2). pp. 507-525. ISSN 2013-0953

 50

 A. P., Puvanasvaran

Organizational Vertical And Virtual Integration Model In Implementing Lean Manufacturing Transformation.

Proceedings Of International Conference On Technology Management And Technopreneurship (ic-tmt) 2012 Participation, 1 (1). Pp. 85-99. Issn Ic-tmt-2012

 51

 A. P., Puvanasvaran

Workshop Store Room Improvement With 5s: A Case Study.

Advanced Manufacturing Technology, 7 (1). pp. 45-62. ISSN 1985-3157

 52

A. P., Puvanasvaran and C. Z. , Mei and V. A. , Alagendran

Overall Equipment Efficiency Improvement Using Time Study In An Aerospace Industry.

Procedia Engineering 00 (2013) 000–000 . pp. 1-9. ISSN 00 (2013) 000–000

 53

A. P., Puvanasvaran and T.S.N., Stephanie and N., Norazlin

Study On Streamlined Process Improvement By Using Value Stream Mapping In Automotive Seating Company: A Case Study.

Journal of Advanced Manufacturing Technology (JAMT) , 07 (2). pp. 57-67. ISSN 1985-3157

 54

Ab Rahman, Mohd Nizam and Wan Mahmood, Wan Hasrulnizzam and Md Deros, Baba

Peningkatan Produktiviti Syarikat Pembuatan Melalui Penambahbaikan Fleksibiliti dan Kecekapan Masa : Satu Kajian Simulasi.

Jurnal Teknologi, UTM, 62 (1). pp. 53-61. ISSN 0127-9696

 55

Ab. Rahman , Mahmood and Baharudin , A.B. and Adi , S. and Hussein, N.I.S. and Isa , Halim and Elfi , R.I.F.

Dimensional Deviation Affected by Cutting Parameters and Machine Tool Rigidity in Dry Turning of S45C Steel.

Applied Mechanics and Materials, 315 . pp. 749-754. ISSN 1660-9336

 56

Al Amin, Mohamed Sultan and Isa , Halim and Nor Akramin, Mohamad and Febrian, Idral and Taufik,

A Review on Ergonomics Risk Factors and Health Effects Associated with Manual Materials Handling.

Advanced Engineering Forum . pp. 251-256. ISSN 2234-991X

 57

Chong, Kuan Eng and Lim, Ke Sin

CONWIP based Control of a Semiconductor End of Line Assembly.

Procedia Engineering , 53 . pp. 607-615. ISSN 1877-7058

 58

Isa, Halim and Seri Rahayu , Kamat and Abdullah, Rohana and Hambali, Arif and Ab. Rahman , Mahmood

Electromyography Analysis associated with Prolonged Standing In Metal Stamping Industry.

Journal of Advanced Manufacturing Technology (JAMT) . pp. 15-26. ISSN 1985-3157

 59

Isa , Halim and Seri Rahayu , Kamat and Syed mohamed, Muhammad syafiq and Mohd Shahrizan, Othman and Rohana , Abdullah

Effects of Lifting Height, Twist Angle and Load mass on Psychophysical Experience, Muscle Activity and Heart Rate during Manual Lifting.

Advanced Engineering Forum . pp. 245-250. ISSN 2234-991X

 60

Isa , Halim and Syed Mohamed, Muhammad Syafiq

An Overview of Ergonomics Problems Related to CNC Machining Operations.

Advanced Engineering Forum . pp. 137-142. ISSN 2234-991X

 61

Kamat, Seri Rahayu and Norhidayah, Hashim and Mohd Shahrizan, Othman

A Study on Muscle Fatigue Associated with Awkward Posture among Workers in Aerospace Industry.

Advanced Materials Research Journal, 10 . pp. 287-292. ISSN 1022-6680

 62

 Mohamad, Effendi

Characteristic Mapping Of Overall Equipment Effectiveness Elements Through Simulation And The Taguchi Method.

Journal of Human Capital Development, 6 (2). pp. 1-11. ISSN 1985-7012

 63

 Mohamad, Effendi

Quantifying Benefits Of Lean Manufacturing Tools Implementation With Simulation In Coolant Hose Factory.

Journal of Human Capital Development, 6 (2). pp. 13-26. ISSN 1985-7012

 64

 Perumal, Puvanasvaran

Engineer in Society - Module 10. Other.

Penerbit UTeM, UTeM.

 65

 Perumal, Puvanasvaran

Industrial Engineering. Other.

 Penerbit UTeM, UTeM.

 66

 Perumal, Puvanasvaran

Organizational Vertical & Virtual Integration Model in Implementing Lean Manufacturing Transformation.

Journal of Technology Management and Entrepreneurship, 1 (1). pp. 85-99. ISSN 1675-8404

 67

Perumal , Puvanasvaran and Hamdan , Megat and Tang Sai, Hong and Muhamad , Mohd Razali and S Hamouda , Abdel Magid

Lean process management implementation through enhanced problem solving capabilities.

Journal of Industrial Engineering and Management, 3 (3). pp. 1-47. ISSN 2013-0953

 68

syed mohamed, muhammad syafiq and Mohd Tamrin, Shamsul Bahri and Abdul Rahman, Ahmad Rizal

The Suitability of Cross Cultural Models in Predicting Car Interior Design Preferences.

International Journal of Education and Research, 1 (6). pp. 1-12. ISSN 2201-6333

 69

syed mohamed, muhammad syafiq and Ze Mei, Chiang and Hui Hui, Yee

Ergonomics Evaluation on Non Keyboard Input Devices.

Universal Journal of Management and Social Sciences, 3 (9). pp. 65-69. ISSN 2226-6240

 70

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzaman and Saptari, Adi and Ebrahim, Zuhriah and Mohamed Sultan, Al Amin and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah

Manufacturing Performance in Green Supply Chain Management.

World Applied Sciences Journal 21(Special Issue of Engineering and Technology) . pp. 76-84. ISSN 1818-4952

 71

Yuniawan, Dani and Teruaki, Ito and Mohamad, Effendi

Calculation of overall equipment effectiveness weight by Taguchi method with simulation.

Concurrent Engineering: Research And Applications, 21 (4). Pp. 296-306. Issn 1063-293x

 72

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohamed, Norhafiza

The Translational Process Of Cleaner Production Strategies.

Global Engineers & Technologists Review, 3 (5). Pp. 29-39. Issn 2231-9700

 73

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Rosdi, Mohd Noor Hanif

The Trigger Signal For Lean Production Practices : A Review.

Global Engineers & Technologists Review, 3 (6). Pp. 23-32. Issn 2231-9700

 74

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Tukimin, Rahayu

A Review on Optimistic Impact of Cleaner Production on Manufacturing Sustainability.

Journal of Advanced Manufacturing Technology (JAMT) . pp. 79-99. ISSN 1985-3157

 75

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Madia and Mohamad Raffi, Nurul Fatin

Finite Element Model of Machining with High Pressure Coolant for Ti- 6Al-4V alloy.

Procedia Engineering, 53 . pp. 624-631. ISSN 1877-7058

 76

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md. Ali, Mohd Amran and Jusoff, Kamaruzzaman and Sivarao, Subramonian and Ariff, Hambali and Hussein, Nur Izan Syahriah and Wan Mahmood, Wan Hassrulnizzam and Abdullah, Abu and Yusoff, Marianna and Shamshiri, Meysam

Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet.

World Applied Sciences Journal, 21 . pp. 98-104. ISSN 1818-4952

 77

Hamid, Nor Nadiah Abdul and Mohamad, Noraiham and Hing, Lum Yip and Dimin, Mohd Fairuz and Azam, Mohd Asyadi and Hassan, Mohd Haneesyah Che and Mustaq, Mohd Khairul Shahril and Ahmad, Azizah Shaaban

The effect of chitosan content to physical and degradation properties of biodegradable urea fertilizer.

Journal of Scientific and Innovative Research, 2 (5). pp. 893-902. ISSN 2230-4818

 78

 Kasim, Mohd Shahir

Comparison between Taguchi Method and Response Surface Methodology (RSM) In Optimizing Machining Condition.

 In: UNSPECIFIED.

 79

 Kasim, Mohd Shahir

Comparison between up-milling and down-milling operations on tool wear in milling Inconel 718.

Procedia Engineering, 68 . pp. 647-653. ISSN 18777058

 80

 Kasim, Mohd Shahir

Surface Integrity of Newly Developed of Alsi/AlN Metal Matrix Composite during End Milling Under Dry Cutting Conditions.

Research Journal of Applied Sciences, Engineering and Technology, 6 (6). pp. 1129-1134. ISSN 2040-7467

 81

Kasim, Mohd Shahir and Sulaiman, Mohd Amri

Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718.

Materials Science Forum, 773-774 . pp. 653-660. ISSN 1662-9752

 82

Kasim, Mohd Shahir and Sulaiman, Mohd Amri

Prediction Surface Roughness In High-speed Milling Of Inconel 718 Under Mql Using Rsm Method.

Middle-East Journal of Science Research, 13 (3). pp. 264-272. ISSN 1990-9233

 83

Kasim, Mohd Shahir and Sulaiman, Mohd Amri

Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718.

Wear, 302 (1-2). pp. 1171-1179. ISSN 0043-1648

 84

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Che Hassan, Che Haron and A.G., Jaharah and A.I, Gusri and Abdul Yazid, Mohd Zaid

Tool Life of TiAlN PVD Coated Carbide Tool in High-speed End Milling of Untreated Inconel 718 under Minimum Quantity Lubrication Condition.

Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039

 85

Liew , Pay Jun and Shimada, Keita and Mizutani, Masayoshi and Yan , Jiwang and Kuriyagawa, Tsunemoto

Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining.

International Journal of Automation Technology . pp. 621-629. ISSN 881-7629

 86

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto

Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide.

Journal of Materials Processing Technology . pp. 1076-1087. ISSN 0924-0136

 87

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto

Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide.

Applied Surface Science . pp. 731-743. ISSN 0169-4332

 88

Md Ali, Mohd Amran And M., Samsul And Hussein, Nur Izan Syahriah And Mohd Rizal , Salleh And Raja Izamshah , Raja Abdullah And Mohd , Hadzley And Mohd Shahir, Kasim And Mohd Amri , Sulaiman And Sivarao, Subramonian

The Effect of Edm Die-sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method.

Middle-East Journal of Scientific Research . pp. 44-50. ISSN 1990-9233

 89

Minhat, Mohamad and Abd. Rahman, Md Nizam

A mild steel shear zone temperature minimization using genetic algorithm and direct search toolbox in cnc turning operation.

International Review of Mechanical Engineering, 7 (1). pp. 38-45. ISSN 1970-8734 (In Press)

 90

Mohamad Jaya, Abdul Syukor and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Mohd Razali and Abd. Rahman, Md. Nizam and Hasan Basari, Abd Samad

Predictive Modeling of TiN Coating Roughness.

Advanced Materials Research, 626 (2013). pp. 219-223. ISSN 1662-8985

 91

Raja Abdullah, Raja Izamshah and Yuhazri, Yaakob and Mohd , Hadzley and Mohd , amran and Sivarao, Subramonian

Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component.

Applied Mechanics and Materials, 315 . pp. 773-777. ISSN 1660-9336

 92

Raja Abdullah, Raja Izamshah And Yaakob, Mohd Yuhazri And Abu Bakar, Mohd Hadzley And Md Ali, Mohd Amran And Subramonian, Sivarao

Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component.

Applied Mechanics and Materials , 315 (2013). pp. 773-777. ISSN 1662-7482

 93

Sivarao, Subramonian And Alif, Aziz And Raja Abdullah, Raja Izamshah And Taufik, , And Hambali, A

Finite Element Analysis of Super Energy Saving Locking System Towards Enhancing Door Lock Performance and Security.

International Review of Mechanical Engineering, 7 (6). pp. 1147-1151. ISSN 1970-8734

 94

Sivarao, Subramonian and Nantha, kumar and Taufik, , and Sivakumar, Dhar Malingam and Mohd Amri , Sulaiman and Kassim, M.S

Heat Exchanger Analysis to Reduce Hexane Loss in Palm Kernel Oil Extraction Plant.

International Journal of Mechanical and Mechatronics Engineering, 13 (4). pp. 29-33. ISSN 2077-124X

 95

Sivarao, Subramonian and Qumrul, Ahsan and Mohd , amran and Joseph Sahaya Anand, T and Raja Izamshah , Raja Abdullah

Friction Performance Analysis of Waste Tire Rubber Powder Reinforced Polypropylene Using Pin-On-Disk Tribometer.

Procedia Engineering . pp. 743-749. ISSN 1877-7058

 96

Sivarao, Subramonian and Robert, Milkey and Samsudin, Abdul Rahim

RSM Modelling and Optimization of CO2 Laser Machining of Industrial PVC Foam.

International Review on Modelling and Simulations, 6 (4). pp. 1339-1343. ISSN 1974-9821

 97

Sivarao, Subramonian and Robert, Milkey and Samsudin, Abdul Rahim

Taguchi Modeling and Optimization of Laser Processing In Machining of Substantial Industrial PVC Foam.

International Journal of Applied Engineering Research, 8 (12). pp. 1415-1426. ISSN 0973-4562

 98

Sivarao, Subramonian And S., Thiru And Jusoff, Kamaruzzaman And Azizah, Shaaban And Mariana, Yusoff And Jano, Zanariah And Yuhazri, Yaakob And Hasoloan , Haery Ian Pieter And Abu Bakar, Mohd Hadzley And Raja, Izamshah And Hussein, Nur Izan Syahriah And Mohd Amran, Md Ali And Taufik, , And Wahyono Sapto, Widodo And Tan, Cheefai And Sivakumar, Dhar Malingam

Modelling of CO2 Laser Materials Processing by Networked Neuro-Dimension Fuzzy Intelligent System.

Australian Journal of Basic and Applied Sciences, 7 (3). pp. 35-45. ISSN 1991-8178

 99

Sivarao, Subramonian and Samsudin, Abdul Rahim and Tin , Shaw Ling and Anuar , Mohamed Kassim and Taufik, , and Mohd Amran, Md Ali

Programable Automatic Servise Time Reminder (PAST-R) To Overcome Traditional Maintenance Approach.

Australian Journal of Basic and Applied Sciences, 7 (11). pp. 206-212. ISSN 1991-8178

 100

Wan Hasrulnizzam , Wan Mahmood and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzzaman and Adi, Saptari and Zuhriah, Ebrahim and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah

Manufacturing Performance in Green Supply Chain Management.

World Applied Sciences Journal . pp. 76-84. ISSN 1818-4952

 101

Yamaguchi, Masayuki and Yokohara , Tadashi and Md Ali , Mohd Amran

Effect of flexible fibers on rheological properties of poly(Lactic Acid) composites under elongational flow.

Journal of the Society of Rheology Japan . pp. 129-135. ISSN 0387-1533

 102

Abdul Rahman, Azrul Azwan and Seliger, G?nther

Integrated control system simulation for supporting changes of routing strategy in an automated material flow system.

Procedia CIRP . pp. 407-412. ISSN 2212-8271

 103

Abdullah, Lokman and Jamaludin, Zamberi and Ahsan, Qumrul and Jamaludin, Jailani and RAFAN, NUR AIDAWATY and Chiew, Tsung Heng and Jusoff, Kamaruzzaman and Yusoff, Marianna

Evaluation on Tracking Performance of PID, Gain Scheduling and Classical Cascade P/PI Controller on XY Table Ballscrew Drive System.

World Applied Sciences Journal, 21 (1). 01-10. ISSN 1818-4952

 104

Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and RAFAN, NUR AIDAWATY and Maidin, Shajahan

Theoretical Analysis of Close Loop Behaviour of Ideal Cascade Controller Structure for Positioning of XY Table Ballscrew Drive System.

Applied Mechanics and Materials, 315 (1). pp. 493-497. ISSN 1660-9336

 105

Abdullah, Lokman and Jamaludin, Zamberi and Qumrul, Ahsan and Nur Aidawaty, Rafan and Mariana , Yusof and Jamaludin, Jailani and Chiew, Tsung Heng

Evaluation on Tracking Performance of PID, Gain Scheduling and Classical Cascade P/PI Controller on XY Table Ballscrew Drive System.

World Applied Sciences Journal, 21 (1). 01-10. ISSN 1818-4952

 106

Bin Md Fauadi, Muhammad Hafidz Fazli and Yahaya, Saifudin Hafiz

Intelligent Combinatorial Auctions of Decentralized Task Assignment for AGV With Multiple Loading Capacity.

Ieej Transactions On Electrical And Electronic Engineering, 8 (4). Pp. 371-379. Issn 1931-4973

 107

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and RAFAN, NUR AIDAWATY and Abdullah, Lokman

Identification of Friction Models for Precise Positioning System in Machine Tools.

Procedia Engineering , 53 (1). pp. 569-578. ISSN 1877-7058

 108

khaksar, w. and tang, s.h. and motlagh, o.

A genetic-based fuzzy-tabu controller for mobile robot randomised navigation in unknown environment.

International Journal of Innovative Computing Information and control . xx-xx. ISSN

 109

Mohd Najib , Ali Mokhtar and Fairul Azni, Jafar and Ahmad Yusairi, Bani Hashim and Hazman, Hasib and Mohd Nazrin, Muhammad

Analysis of unimorph piezoceramic patches on damped square shaped plate.

Applied Mechanics and Materials, 315 . pp. 965-971. ISSN 1660-9336

 110

motlagh, o and jamaludin, z

An Agile FCM for real-time modeling of dynamic and real-life systems.

Evolving Systems: Special Issue on Temporal Aspects in Fuzzy Cognitive Maps . xxxx-xxxx. ISSN 1868-6478

 111

motlagh, o and nakhaeinia, n and tang, s.h.

Automatic Navigation of Mobile Robots in Unknown Environments.

Neural Computing and Applications . xxxx-xxxx. ISSN

 112

motlagh, o and tang, s.h. and Maslan, Mohd Nazmin and Jafar, Fairul Azni and Aziz, Maslita

A novel graph computation technique for multi-dimensional curve fitting.

Connection Science, 25 (2-3). pp. 129-138. ISSN 0954-0091 (Print), 1360-0494 (Online)

 113

tang, s.h. and Kanasen, n.k. and motlagh, o

An algorithm for navigation of mobile robots in cluttered environments.

Advanced Science Letters . xxxx-xxxx. ISSN

Hits: 2443