CONFERENCE

NO

                      RESEARCHER

                             TITLE

                        CONFERENCE

1

Abdul Halim, Rahimah and Yaakob, Mohd Yuhazri and Hasoloan, Haery Ian Pieter

Design and Analysis of a New Natural Illumination Device through Lumen Method Approach.

In: 3rd International Conference on Mechanical and Manufacturing Engineering , 20-21 November 2012, UTHM.

2

Akiah, Masni Azian and Hasoloan, Haery Ian Pieter and Yaakob, Mohd Yuhazri

 

Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray.

In: International Conference on Advanced Material Engineering and Technology, 28-30 NOVEMBER 2012, penang.

3

Asyadi Azam, Mohd and Mohamad, Noraiham and Mohd Warikh, Abd Rashid

Fabrication and Characterization of Epoxidized Natural Rubber Reinforced Single-Walled Carbon Nanotubes Nanocomposite.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

4

Chua, Kok Yau and A.R.M., Warikh and T., Joseph Sahaya Anand

Microstructural studies of Cu-Al Intermetallic Compound at Thermosonic Wire Bonding Interface.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15-16 October 2012, Hotel Equatorial, Melaka.

5

Chua, Kok Yau and T., Joseph Sahaya Anand

XRD Analysis of Interconnect Intermetallic Compound in an Annealed Micro-Chip.

In: International Conference on X-Rays & Related Techniques in Research & Industry , 3-5 July 2012, Vistana Hotel, Penang.

6

K.M. Rajan, Rajes and Abdul Aziz, Mohd Zaidan Bin and T., Joseph Sahaya Anand

Electrosynthesized NiS2 Thin Film and Their Characterization Studies.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16, October 2012, Hotel Equatorial, Melaka.

7

M.Y, Yuhazri and A.M, Hairul  Effendy and Y, Juliana and A.S, Rahim and M, Noraiham

Study of CFRP Manufacturing Offcuts with Ssecondary Resin Impregnation via Hand Lay Up.

In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

8

M.Y, Yuhazri and A.M, Kamarul and A.H, Rahimah and Haeryip, Sihombing and S.H, Yahaya and K.F, Samat and R, Izamshah

Experimental Study on Effect of Reflector Bed Designs Heated by Direct Solar Radiation for Hot Water Storage System.

In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

9

Y, Yuhazri and A.M, Kamarul and S.H, Yahaya and A.H, Rahimah and M.N, Maslan and M, Hairul Effendy and Haeryip, Sihombing

Experimental Evaluation of Performance of Different Thermal Boxes Heated by Solar Radiation for Hot Water Storage System.

In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

10

M.Y, Yuhazri and F.R, Faisal and N.Z, Sharafina and A.M, Hairul Effendy and A.R, Toibah and S.T, Rahmah and M.A, Asyadi Azam and M, Noraiham

Mechanical Properties of Polypropylene/Epoxidized Natural Rubber Blend via Mixing Ratio Analysis.

In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

11

M.Y, Yuhazri and Haeryip, Sihombing and S.H, Yahaya and M.A, Kamely and M.K, Hannan

The Measurement of Herzberg’ Employees Satisfaction using Kano Method.

In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

12

M.Y, Yuhazri and L, Abdullah and Z, Jamaludin and T.H, Chiew and N.A, Rafan

Extensive Tracking Performance Analysis of Classical Feedback Control for XY Stage Ballscrew Drive System.

In: 4th International Conference on Mechanical and Electrical Technology , 26-26 JULY 2012, KL.

13

M.Y, Yuhazri and M, Noraiham and A.M, Hairul Effendy and M.O, Shahrizan and M, Andanastuti and J.G, Jameelah and M, Dahlan and A, Husna

Regression Model of Processability Properties of Epoxidized Natural Rubber-Alumina Nanoparticle Composites (ENRAN) using Historical Data Design.

In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

14

Mohd Abid, Mohd Asyadi Azam

Thermoelectric and Electrochemical Properties of Highly Ordered Conducting Polymer/Carbon Nanotube Structures.

In: 12th International Workshop on the Electrochemistry of Electroactive Materials (WEEM), 3-6 June 2012, Szeged, Hungary.

15

T., Joseph Sahaya Anand and Abdul Aziz, Mohd Zaidan Bin and S., Shariza

Effect of Additives on Optical Measurements of NiSe2 Thin Films.

In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012, November 20 - 21, 2012, SERI Malaysia Hotel, Kangar.

16

T., Joseph Sahaya Anand and Abdul Aziz, Mohd Zaidan Bin and K.M.Rajan, Rajes

Electrosynthesized NiSe2 thin films and their characterization studies.

In: International Conference of Young Researchers on Advanced Materials, July 1 - 6, 2012, MATRIX Building, National University of Singapore (NUS), Singapore. (Unpublished)

17

T., Joseph Sahaya Anand and Chua, Kok Yau

X-ray Diffraction Study of Intermetallic Cu-Al Interconnection in Electronic Components.

In: International Conference of Young Researchers on Advanced Materials, July 1 - 6, 2012, MATRIX Building< National University of Singapore (NUS), Singapore. (Unpublished)

18

T., Joseph Sahaya Anand and S., Shariza and Lim, Mei Ying

Transition Metal Chalcogenide Thin Films for Photoelectrochemical / Solar Cells.

In: 3rd Infineon-MMU Technical Symposium, 9 April 2012, Multimedia University, Melaka.

19

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar

Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body.

In: Seminar Hasil Penyelidikanm, KPT, 8 - 9 November 2012, AKEPT, Bandar Enstek,KL.

20

Yaakob, Mohd Yuhazri

A Preliminary Novel Study On The Gravity Effects of Curing or Drying Angle on Laminated Composite Structure.

 

In: 5th International ConferenceE On Postgraduate Education, 18-19 December 2012, UTM Skudai.

21

Yaakob, Mohd Yuhazri and Amir Mohamed, Kamarul  and Hasoloan , Haery Ian Pieter and Yahaya, Saifudin Hafiz and Raja Abdullah, Raja Izamshah

An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Night.

In: 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, UTHM.

22

A, Hambali and M.S, Izzati and A.A, Tajul and A.R, soufhwee and Roni Sahroni, Taufik

Application of Analytical Hierarchy Process (AHP) in Material Selection Process for Automotive Bumper Fascia.

In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

23

A, hambali and L.I, Intan and A.A, Tajul and A.R, Soufhwee and Roni Sahroni, Taufik

Selection of Manufacturing Process for Automotive Bumper Fascia Using Analytical Hierarchy Process.

In: International Conference on Design and Concurrent Engineering 2012, October 15–16, 2012, Equatorial Hotel, Melaka.

24

Masni-Azian, Akiah and Toibah, Abd Rahim and Mohd Nazrin, Muhammad and Zuraida, Abdul Majid

Preliminary Development of Abrader Tool for Paper De-Printing Apparatus using Taguchi Method.

In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

25

 A. P., Puvanasvaran

Evolution Sustainable Innovation Management in China.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

26

 A. P., Puvanasvaran

Overall Equipment Efficiency (Oee) Improvement Through Integrating Quality Tool: Case Study.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

27

 A. P., Puvanasvaran

A Study on the Effect of Different Interconnection Materials (Wire and Bond Pad) on Ball Bond Strength after Temperature Cycle Stress.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

28

 A. P., Puvanasvaran

Sustainability of Green Technology in Malaysia Industry.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15-16 October 2012, Universiti Teknikal Malaysia Melaka (UTeM).

29

 A. P., Puvanasvaran

University-SME clusters: A research on commercialization perspective among IPTA & IPTS in Malaysia.

Proceedings of International Conference on Technology Management and  Techhnopreneurship (IC-TMT) 2012, 1 (1). pp. 10-20. ISSN IC-TMT 2012

30

A. P., Puvanasvaran

Workshop Store Room Improvement With 5s: A Case Study.

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

31

Ahmad, NurulHuda and Kamat, Seri Rahayu

Car Accidents Analysis Through Virtual Window Interface.

 

In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

32

Isa, Halim and Al Amin, Mohamed Sultan and Seri Rahayu , Kamat and Rohana, Abdullah

Muscle Activity while Standing for Prolonged Time Periods in Metal Stamping Industry.

In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

33

R., Thevendran and A. P. , Puvanasvaran

Industrializing the University-SME Commercialization: A Conceptual Study of Commercialization Industry in Malaysia.

Proceedings of International Conference on Technology Management and Techhnopreneurship (IC-TMT) 2012, 1 (1). pp. 100-107. ISSN IC-TMT 2012

34

Abbas, Adnan Jameel and Minhat, Mohamad and Abdul Rahman, Md. Nizam Bin and Akbar, Habibullah

Future prospects of turning processes optimization using metaheuristics methods.

In: International Conference on Uncertainty Reasoning and Knowledge Engineering ICURKE 2012, 14-15 Aug. 2012, Jakarta, Indonesia.

35

Abd Rahman, Md Nizam and Abdullah, Rohana

Work Study Techniques Evaluation at Back-End Semiconductor Manufacturing.

In: International Conference on Design and Concurrent Engineering, 15-16 Oct 2012, Equatorial Hotel, Melaka.

36

Abd. Rahman, Md. Nizam and Abdullah, Rohana

Work Study Techniques Evaluation at Back-End Semiconductor Manufacturing.

 

In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

37

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Nadia and Mohammad Raffi, Nurul Fatin

Finite Element Model of Machining with High Pressure Coolant for Ti-6Al-4V alloy.

Proceedings of Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012 . pp. 295-300. ISSN 978-967-5415-49-4

38

J.A., Adnan and Minhat, Mohamad and Abd Rahman, Md Nizam

Artificial Immune System (AIS) Algorithm For Optimizing Shear Zone Temperature In CNC Turning Operation.

In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

39

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Raja Abdullah, Raja Izamshah and Abu Bakar, Md Ali and Sivarao, Subramonian and HUSSEIN, NUR IZAN SYAHRIAH and Hussain, Mohamad Zaki

Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part.

In: The 28th International Conference Of The Polymer Processing Society (PPS-28), 11-15 December, Pattaya.

40

Md Ali, Mohd Amran and Raja, Izamshah and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Hussein, Nur Izan Syahriah

Mechanical Properties of Polypropylene Composites Containing Polymer Fibers.

In: International Conference on Design and Concurrent Engineering, iDECON2012. Universiti Teknikal Malaysia Melaka, pp. 239-242. ISBN 978-967-0257-16-7

41

Minhat, Mohamad

Design and Machining Control via Interoperable Function and STEP-NC Data Model.

In: International Conference on Flexible Automation and Intelligent Manufacturing, June 10-13, 2012, Helsinki, Finland.

42

Minhat, Mohamad

Design and Machining Control via Interoperable Function Blocks and STEP-NC Data Model.

In: 3rd International Conference on Design and Product Development (ICDPD 2012), December 29-31, 2012, Montreux, Switzerland.

43

Maslan, Mohd Nazmin

Identification and Control of a Piezoelectric Bender Actuator.

In: 2012 Third International Conference on Intelligent Systems Modelling and Simulation.

44

Mohd Najib, Ali Mokhtar and Nik Syahrim , Nik Anwar and Mohd Nazrin , Muhammad and Masni Azian, Akiah and Saifudin Hafiz , Yahaya

Motion Synthesis of Planar Four Linkage Movement for Part Flipping Application.

 

In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia

 

                           JOURNAL

NO

                     RESEACHER

                               TITLE

                             JOURNAL

1

A.R.M, Warikh and Mohd Rosli, Zulkifli and Gakim, Miron and M.A, Asyadi Azam

Formation of Cr23C6 during the Sensitization of AISI 304 Stainless Steel and its Effect to Pitting Corrosion.

International Journal of Electrochemical Sience . pp. 9465-9477. ISSN 1452-3981

2

Abd Manaf, Mohd Edeerozey

Material design of retardation films with extraordinary wavelength dispersion of orientation birefringence: a review.

Cellulose, 19 . pp. 601-613. ISSN 1572-882X

3

Abdullah, Lokman and Jamaludin, Zamberi and Rafan, Nur Aidawaty and Yaakob, Mohd Yuhazri

Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system.

Applied Mechanics and Materials , 229-231 (2012). pp. 750-755. ISSN 1662-7482

4

Hasoloan, Haery Ian Pieter and Yaakob, Mohd Yuhazri

Analysis and development of recycled materials for wood plastic composite product.

Elixir Mech. Engg., 51 (51). pp. 10834-10840. ISSN 2229 -712X

5

Hasoloan, Haery Ian Pieter and Yaakob, Mohd Yuhazri

Taguchi’s Quality Improvement Analysis of the SME Bread Manufacturing.

Global Engineers & Technologists Review, 2 (9). pp. 6-18. ISSN 2231-9700

6

Hasoloan, Haery Ian Pieter, Yaakob, Mohd Yuhazri and Perumal, Puvanasvaran and Abd Razak , Jeeffrie

Real of Simply Assembly Line Balancing using Fact-Model.

International Journal of Computer and Electrical Engineering, 4 (6). pp. 870-874. ISSN 1793-8163

7

Hasoloan, Haery Ian Pieter,  Yaakob, Mohd Yuhazri and Yahaya, Saifudin Hafiz

How to Measure and Identify The Ultimate Improvement Required for Customer Satisfaction

Global Engineers & Technologists Review, 2 (11). pp. 15-28. ISSN 2231-9700

8

Hasoloan, Haery Ian Pieter and Yaakob, Mohd Yuhazri and Yahaya, Saifudin Hafiz

Revisited The Importance And Performance Analysis (ipa) And Kano Model For Customer Satisfaction Measurement.

Global Engineers & Technologists Review, 2 (1). pp. 22-39. ISSN 2231-9700

9

Md Palil, Md Dan and Aaron Yu, L  

Design And Analysis A New Materials Of Gasket Pipping Using Waste Rubber Tyres And Coconut Coir Fibre.

Advanced Manufacturing Technology, 6 (2). pp. 11-27. ISSN 1985-3157

10

Mohd Abid, Mohd Asyadi Azam

Direct growth of vertically aligned single-walled carbon nanotubes on conducting substrate and its electrochemical performance in ionic liquid.

Physica Status Solidi A, 209 (11). pp. 2260-2266. ISSN 1862-6319

11

Mohd Rosli, Zulkifli and Kwan, Wai Loon and Jariah, Mohamad Juoi and nafarizal, nayan and Zainab , Mahamud

Effect of Grain Size on the Corrosion Behavior of TiAlBN Nanocomposite Coating.

Solids and Structures (SAS) . pp. 10-15. ISSN 2327-1728

12

Mohd Rosli, ZULKIFLI and Zainab , Mahamud and Jeefferie, Abd Razak and masrom, kadir

Effect of PEG Molecular Weight on the TiO2 Particle Structure and TiO2 Thin Films Properties.

Advanced Materials Research . pp. 76-80. ISSN 1022-6680

13

Mohd Warikh, Abd Rashid and Miron, Gakim and Zulkifli, Mohd Rosli and Mohd Asyadi 'Azam, Mohd Abid

Formation of Cr23C6 During the Sensitization of AISI 304 Stainless Steel and its Effect to Pitting Corrosion.

International Journal of Electrochemical Science (IJES), 7 . pp. 9465-9477. ISSN 1452-3981

14

Said, Md Radzai and Yaakob, Mohd Yuhazri

On the effect of geometrical designs and failure modes in composite axial crushing

A literature review. Composite Structure, 94 (2012). pp. 802-8012. ISSN 0263-8223

15

Said, Md Radzai and Yaakob, Mohd Yuhazri

The Finite Element Analysis on Hexagonal Ring Under Simple Lateral Loading.

Global Engineers & Technologists Review, 2 (2). pp. 1-7. ISSN 2231-9700

16

T., Joseph Sahaya Anand

T., Joseph Sahaya Anand (2012) Nickel As An Alternative Automotive Body Materials.

Journal of Mechanical Engineering and Sciences, 2 . pp. 187-197. ISSN 2231-8380

17

T., Joseph Sahaya Anand and Chua, Kok Yau

Oxidation study on as-bonded intermetallic of Copper wire-Aluminum bond pad metallization for electronic microchip.

Materials Chemistry and Physics, 136 (2-3). pp. 638-647. ISSN 0254-0584

18

T., Joseph Sahaya Anand and Kok, Yau Chua

XRD Analysis Of Cu-Al Interconnect Intermetallic Compound In An Annealed Micro-Chip.

Advanced Materials Research, 620 . pp. 166-172. ISSN 1022 - 6680

19

T., Joseph Sahaya Anand and S., Shariza

A study on molybdenum sulphoselenide (MoSxSe2?x, 0 ? x ? 2) thin films: Growth from solution and its properties.

Electrochimica Acta, 81 . pp. 64-73. ISSN 0013-4686

20

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli

Electrosynthesized MoS2 Thin Films for Photoelectrochemical (PEC) Cells.

Solid State Science and Technology Letters, 19 (1-2). pp. 64-72. ISSN 0128 - 8393

21

Widodo, Wahyono Saptoand Hasoloan, Haery Ian Pieter and Yaakob, Mohd Yuhazri

Design and Analysis of 5 KW Savonius Rotor Blade.

Global Engineers & Technologists Review, 2 (8). pp. 1-8. ISSN 2231-9700

22

Dan, M.M.P & Yuhazri, M.Y.Y.

Agriculture by Product Fibre Hybrid Composite for Use in The Construction of Armor Articles, Members, Structures and The Like.

MY-147022-A.

23

Yaakob, Mohd Yuhazri and Hasoloan, Haery Ian Pieter

A Comparision Analysis on Mechanical Properties between between Wax/LDPE Composite Versus Versus Coconut Coir/wax/LDPE Hybrid.

International Journal of Emerging Technology and Advanced Engineering, 2 (6). pp. 69-73. ISSN 2250-2459

24

Yaakob, Mohd Yuhazri and Hasoloan, Haery Ian Pieter and Yahaya, Saifudin Hafiz

Solid Fuel From Empty Fruit Bunch Fiber and Waste Papers Part 6: Dimension Stability Test After Exposed to Ambient Condition.

 

Global Engineers & Technologists Review, 2 (6). pp. 6-11. ISSN 2231-9700

25

Yaakob, Mohd Yuhazri

Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: A comparative study.

Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

26

Yaakob, Mohd Yuhazri

Synthesis And Fabrication Of An Effectual Dye Sensitized Solar Cell.

Global Engineers & Technologists Review, 2 (3). pp. 9-15. ISSN 2231-9700

27

Yaakob, Mohd Yuhazri And Hasoloan, Haery Ian Pieter

Solid Fuel From Empty Fruit Bunch Fiber And Waste Papers Part 1: Heat Released From Cumbustion Test.

Global Engineers & Technologists Review, 2 (1). pp. 7-13. ISSN 2231-9700

28

Yaakob, Mohd Yuhazri And Hasoloan, Haery Ian Pieter And Yahaya, Saifudin Hafiz And Said, Md Radzai

Solid Fuel From Empty Fruit Bunch Fiber And Waste Papers Part 3: Ash Content From Combustion Test.

Global Engineers & Technologists Review, 2 (3). pp. 26-32. ISSN 2231-9700

29

Yaakob, Mohd Yuhazri And Hasoloan, Haery Ian Pieter And Yahaya, Saifudin Hafiz And Said, Md Radzai

Solid Fuel From Empty Fruit Bunch Fiber And Waste Papers Part 4: Compression Test At Lateral Position.

Global Engineers & Technologists Review, 2 (4). Pp. 16-22. Issn 2331-9700

30

Yaakob, Mohd Yuhazri And Hasoloan, Haery Ian Pieter And Yahaya, Saifudin Hafiz And Said, Md Radzai

Solid Fuel From Empty Fruit Bunch Fiber And Waste Papers Part 7: Water Absorption Test.

Global Engineers & Technologists Review, 2 (7). pp. 7-12. ISSN 2231-9700

31

Yaakob, Mohd Yuhazri And Hasoloan, Haery Ian Pieter And Yahaya, Saifudin Hafiz And Said, Md Radzai

Solid Fuel From Empty Fruit Bunch Fiber And Waste Papers Part 2: Gas Emission From Combustion Test.

Global Engineers & Technologists Review, 2 (2). pp. 7-13. ISSN 2231-9700

32

Yaakob, Mohd Yuhazri And Hasoloan, Haery Ian Pieter And Yahaya, Saifudin Hafiz And Said, Md Radzai

Solid Fuel From Empty Fruit Bunch Fiber And Waste Papers Part 5: Crack Test For Transportation And Storage Purpose.

Global Engineers & Technologists Review, 2 (5). pp. 20-24. ISSN 2231-9700

33

Yahaya, Saifudin Hafiz And Hasib, Hazman And Ahmad Kamely , Mohamad And Md Fauadi , Muhammad Hafidz Fazli And Yaakob, Mohd Yuhazri

E-recycling System Model And Its Applications To Plastic, Paper And Disc.

Global Engineers & Technologists Review, 2 (10). pp. 1-7. ISSN 2231-9700

34

Yahaya, Saifudin Hafiz And Hasoloan, Haery Ian Pieter And Yaakob, Mohd Yuhazri

Integrating Spur Gear Teeth Design And Its Analysis With G2 Parametric Bezier-like Cubic Transition And Spiral Curves.

Global Engineers & Technologists Review, 2 (8). pp. 9-22. ISSN 2231-9700

35

Yahaya, Saifudin Hafiz And Hasoloan, Haery Ian Pieter And Yaakob, Mohd Yuhazri And Hasib , Hazman

Modeling of a Jig Sampling and its Application in Disc Cutter Tools.

Journal of Mechanical and Civil Engineering, 3 (2). pp. 20-23. ISSN 2278-1684

36

A, Hambali and A.R, Rabiatul and A.S, Rahim and S, Taufik

DESIGN OPTIMIZATION OF AUTOMOTIVE BUMPER BEAM THROUGH ENERGY ABSORPTION ANALYSIS.

International Journal of Engineering and Science, 13 (1). pp. 35-40. ISSN 2086-3799

37

A, Hambali and R, Faiz and A.A, Tajul and A.B, Baharudin and M.M.P, Dan

Development of conceptual design of Car Housing Side Mirror using Integrated Approach.

Journal of Advanced Manufacturing Technology . pp. 31-40. ISSN 1985-3157

38

Dan, M M P and Aaron Yu, L

Design and Analysis a New Materials of Gasket Pipping Using Waste Rubber Tyres and Coconut Coir Fibre.

Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-15. ISSN 1985-3157

39

Dan, M M P and Fadhli Akmal, A M

Design Crash Cushion Using Waste Tire for Toll Plaza Barrier.

Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-10. ISSN 1985-3157

40

Dan, M M P and Khairul Fikhri, K A

Study of Bollard Pull Harbour Tug: Focuses on Stability and Straight Movement.

Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-14. ISSN 1985-3157

41

Roni Sahroni, Taufik and Ariff, Hambali and Abdullah, Tajul Arfiifn and Sivarao, Subramonian

Design Optimization of Multi Vacuum Manifold for Semiconductor Industry.

Malikussaleh Industrial Engineering Journal (MIEJ), 1 (1). pp. 5-10. ISSN ISSN 2302 934X

42

Roni Sahroni, Taufik and Sivarao, Subramonian and Ariff, Hambali and Abdullah, Tajul Ariffin

Design of Jigs and Fixtures for Hydraulic Press Machine.

Malikussaleh Industrial Engineering Journal . pp. 19-24. ISSN ISSN 2301 934X

43

A. P., Puvanasvaran

Enhancing Productivity Through Lean Behavior.

In: Theoretical and Methodological Approaches to Social Sciences and Knowledge Management. INTECH, pp. 283-306. ISBN 978-953-51-0687-6

44

 A. P., Puvanasvaran

Interrelationship Between Availability With Planning Factor and Mean Time Between Failures (MTBF) in Overall Equipment Effectiveness (OEE).

Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 29-38. ISSN 1985-3157

45

A. P., Puvanasvaran and M. R., Muhamad

Lean principles adoption in environmental management system (EMS): A survey on ISO 14001 certified companies in Malaysia.

Journal of Industrial Engineering and Management, 5 (2). pp. 406-430. ISSN 2013-8423

46

A. P., Puvanasvaran and M. R. , Muhamad

INTEGRATION MODEL OF ISO 14001 WITH LEAN PRINCIPLES.

American Journal of Applied Sciences, 9 (12). pp. 1974-1978. ISSN 1546-9239

47

 A. P. , Puvanasvaran

Employability Skills Assessment Tool Development.

International Education Studies, 5 (5). pp. 43-56. ISSN 1913-9039

48

 Haeryip , Sihombing

An Analysis of the Customer Satisfaction: A Case Study of Bank Service.

International Journal of Application or Innovation in Engineering & Management (IJAIEM), 1 (2). pp. 33-43. ISSN 2319 - 4847

49

 Isa, Halim

Analysis of Time-to-Fatigue for Standing Jobs in Metal Stamping Industry.

Advanced Materials Research, 433-440 . pp. 2155-2161. ISSN 1662-8985

50

 Isa, Halim

Assessment of Muscle Fatigue Associated with Prolonged Standing in the Workplace.

Safety and Health at Work, 3 (1). pp. 31-42. ISSN 2093-7911

51

 Isa, Halim

Development of Prolonged Standing Strain Index to Quantify Risk Levels of Standing Jobs.

International Journal of Occupational Safety and Ergonomics (JOSE), 18 (1). pp. 85-96. ISSN 1080-3548

52

 Isa, Halim

Modelling and Optimization Approach of Quantitative Environmental Ergonomics in Malaysian Automotive Industry.

Journal of Occupational Safety and Health, 9 (1). pp. 7-13. ISSN 1675-5456

53

Isa, Halim and Rohana, Abdullah

A Survey on Work-related Musculoskeletal Disorders (WMSDs)among Construction Workers.

Journal of Occupational Safety and Health, 9 (1). pp. 15-19. ISSN 1675-5456

54

 Kamat, Seri Rahayu

Strength Capabilities and Subjective Limit of Repetitive Manual Insertion Task.

Scottish Journal of Arts, Social Sciences and Scientific Studies, 1 (6). pp. 2047-1278. ISSN 2047 - 1278

55

Mohamad, Effendi and Salleh, Mohd Rizal

Simulation Study Towards Productivity Improvement for Assembly Line.

Journal of Human Capital Development, 5 (2). pp. 59-69. ISSN 1985-7012

56

Sihombing, Haeryip and M.K., Hafiz and M.Y. , Yuhazri

Taguchis Quality Improvement Analysis of the SME Bread Manufacturing.

Global Engineers & Technologist Review, 2 (9). pp. 6-18. ISSN 2231-9700

57

Sihombing, Haeryip and M.Y., Yuhazri and A.Razak, Jeefferie and P., Perumal and Akbar, Habibulah

Real of Simply Assembly Line Balancing using Fact-Model.

International Journal of Computer and Electrical Engineering, 4 (6). pp. 870-874. ISSN 1793-8163

58

Sihombing, Haeryip and M.Y., Yuhazri and S.H., Yahaya

How to Measure and Identify the Ultimate Improvement Required for Customer Satisfaction.

Global Engineers & Technologists Review, 2 (11). pp. 14-28. ISSN 2231-9700

59

Sihombing, Haeryip and M.Y., Yuhazri and S.H., Yahaya and Z.A., Myia Yuzrina and A.Z., Ainul Azniza

Revisited The Importance and Performance Analysis (IPA) and Kano Model for Customer Satisfaction Measurement.

Global Engineers & Technologists Review, 2 (1). pp. 22-39. ISSN 2231-9700

60

Sihombing, Haeryip and Rassiah, Kannan and Ashaari, Zaini and M.Y., Yuhazri

An Analysis and Development of Recycled Materials for Wood Plastic Composite Product.

Elixir Mechanical Engineering, 51 . pp. 10834-10840. ISSN 2229-712X

61

Sihombing, Haeryip and Yuhazri, Yaakob and YAHAYA, SAIFUDIN HAFIZ and Sivarao, Subramonian and Hazwan, M.A

An Analysis of Quality Criteria to Determine the Improvement Priority Attributes.

Universiti Teknikal Malaysia Melaka, pp. 489-493. ISBN 978-967-0257-16-7

62

Sihombing , Haeryip and M.Y., Yuhazri

Revisited The Measurement Strategy of Public Sectors Performance Using Fitted Management.

Journal of Human Capital Development, 5 (2). pp. 77-111. ISSN 1985-7012

63

syed mohamed, muhammad syafiq

The Influence of Different Hand Tool Designs on the Perception of Aesthetics, Ergonomics and Usability.

International Journal of Business and Social Science , 3 (3). pp. 241-246. ISSN 2219-6021

64

syed mohamed, muhammad syafiq and ideris, harizah

Managing Risks in a Manufacturing Environment : A Perspective from Reason’s Accident Causation Model.

Universal Journal of Management and Social Sciences, 2 (8). pp. 38-46. ISSN 2226-6240

65

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba

Green Supply Chain Management in Malaysian Aero Composite Industry.

Jurnal Teknologi, UTM, 59 . pp. 13-17. ISSN 0127-9696

66

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba

Model Persamaan Struktural untuk Mengkaji Kesan Pengurusan Rantaian Pembekalan Hijau dalam Industri Pembuatan.

Jurnal Teknologi, UTM, 59 . pp. 21-27. ISSN 0127-9696

67

Yaakob, Mohd Yuhazri and Sihombing, Haeryip and Perumal, Puvanasvaran

Study Of The Optimum Condition Towards The Inducing Paraffin Wax Ldpe.

International Journal of Engineering & Technology IJET-IJENS, 10 (4). pp. 9-12.

68

Abbas, Adnan Jameel and Minhat, Mohamad and Abd Rahman, Md Nizam

Optimization of Machining Parameters in Turning Operation Using PSO and AIS Algorithms: A Survey.

Scottish Journal of Arts, Social Sciences and Scientific Studies , 7 (1). ISSN ISSN 2047-1278

69

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Nadia and Mohammad Raffi, Nurul Fatin

Finite Element Model of Machining with High Pressure Coolant for Ti-6Al-4V alloy.

Proceedings of Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012 . pp. 295-300. ISSN 978-967-5415-49-4

70

Hussein, Nur Izan Syahriah and Md Ali, Mohd Amran and Sivarao, Subramonian

Effect of CNC Ball Nose End Milling Process Parameters on Surface Roughness and Chip Length of Aluminium Alloy 6061.

Universiti Teknikal Malaysia Melaka, pp. 1-3. ISBN 978-967-0257-16-7

71

Liew, Pay Jun and Yan , Jiwang and Masaki, Takeshi and Kuriyagawa, Tsunemoto

Effect of Different Dielectric Fluids on Micro EDM of Low Conductivity Ceramic Material RB-SiC.

Advanced Materials Research . pp. 529-534. ISSN 10226680

72

 Minhat, Mohamad

Interoperable CNC Machine via Function Block and STEP-NC Data Model for Milling Operation.

Applied Mechanics and Materials, 229-231 . pp. 2365-2369. ISSN 1660-9336

73

Raja, Izamshah and Abu Bakar, Mohd Hadzley and Mohd , amran and Sivarao, Subramonian

Effects of End Mill Clearance Angle on Surface Error for Machining Low Rigidity Aerospace Structure Component.

Universiti Teknikal Malaysia Melaka, pp. 308-312.

74

 Sivarao Subramonian

An Automatic Tyre Inflating System (atis).

 PI 2012002727

75

 Sivarao Subramonian

Hydro-gas Airless Tyre (hat).

 PI 2012701286.

76

 Sivarao Subramonian

Magnetic Airless Tyre (mat).

 PI 2012701282.

77

 Sivarao Subramonian

A Tyre Pressure Sustaining System (t-press).

 PI 2012002728.

78

Sivarao, Subramonian and Abdul , Zuhair and Raja, izam and Mohd , amran and Nur, izan and Mohd , Hadzley

Taper Quality Evaluation Of A Laser Lathed Steel Rod Using Modified Flatbed Co2 Laser Cutting Machine.

International Journal of Current Research and Review, 4 (15). pp. 81-91. ISSN 0975-5241

79

Sivarao, Subramonian and Abdul Rahim , Samsudin and Haeryip , Sihombing and Taufik, , and Yuhazri, Yaakob and Sivakumar, Dhar Malingam and Tan, CheeFai

Promising Techniques of Automotive Engine Lubrication Oil Monitoring System – A Critical Review towards Enhancement.

The International Journal of Engineering And Science, 1 (2). pp. 228-233. ISSN 2319 – 1813

80

Sivarao, Subramonian and Nanthakumar, Rajoo and Widodo, W. Sapto and Haeryip , Sihombing

Hexane Economization In Palm Kernel Oil Plant: A Study After Process Design Improvement.

Global Engineers & Technologists Review, 2 (12). pp. 7-14. ISSN 2231-9700

81

Sivarao, Subramonian and Nur Izan Syahriah, Hussein and Raja Izamshah , Raja Abdullah and Mohd Amran, Md Ali and Mohd , Hadzley

Transforming Linear Laser Cutting machine Into Laser Lathing – An Empirical Investigation & Evaluation of Roundness Quality.

Journal of Current Engineering Research, 2 (2). pp. 98-104. ISSN 2250 - 2637

82

Sivarao, Subramonian and Sivakumar, Dhar Malingam and Taufik, - and Yuhazri, Yaakob and Tan, CheeFai and Haeryip , Sihombing

An Exploratory Study - Critical Laser Processing of Composite Materials.

International Journal of Engineering Research & Technology, 1 (10). pp. 1-8. ISSN 2278-0181

83

Sivarao, Subramonian and Taufik, , and Yuhazri, Yaakob and Haeryip , Sihombing

Critical Review of Electro-Mechanical Door Locking System and Proposal towards Development of Innovative Super Energy Saving Door Locking System.

International Journal of Engineering and Innovative Technology, 2 (5). pp. 201-207. ISSN 2277-3754

84

Sulaiman, Mohd Amri and Kasim, Mohd Shahir

The Study Of Wear Process On Uncoated Carbide Cutting Tool In Machining Titanium Alloy.

Journal of Applied Sciences Research . pp. 4821-4827. ISSN 1819-544X

85

Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and RAFAN, NUR AIDAWATY

Systematic Method for Cutting Forces Characterization for XY Milling Table Ballscrew Drive System.

International Journal of Mechanical & Mechatronics Engineering IJMME, 12 (1). pp. 28-33. ISSN 2077-124X

86

Abdullah, Lokman and Jamaludin, Zamberi and Rafan, Nuraidawaty and Chiew, Tsung Heng

Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system.

Applied Mechanics and Materials, 229-231 (2012). pp. 750-755. ISSN 1660-9336

87

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and M.Y, YUHAZRI

Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system.

Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system , 229-231 . pp. 750-755. ISSN 16609336

88

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and syed mohamed, muhammad syafiq

System Identification of XY Table ballscrew drive using parametric and non parametric frequency domain estimation via deterministic approach.

Procedia Engineering , 41 . pp. 567-574. ISSN 1877-7058

89

Dan, M M P and Bani Hashim, Ahmad Yusairi and Adnan, R A B and Ruzaidi, Z and Khairul, A A R and Rizal, M S and Anton, S P

Computer Vision Based Robotic Polishing Using Artificial Neural Networks.

Journal of Advanced Manufacturing Technology, 6 (1). pp. 1-16. ISSN 1985-3157

90

 Maslan, Mohd Nazmin

Identification and Control of a Piezoelectric Patch Actuator.

In: Latest Advances in Systems Science and Computational Intelligence. WSEAS, pp. 204-209. ISBN 978-1-61804-094-7

91

motlagh, o. and tang, s.h. and khaksar, w. and ismail, n.

An Alternative Approach to FCM Activation for Modeling Dynamic Systems.

journal of applied artificial intelligence . xx-xx. ISSN

92

tang, s.h. and motlagh, o. and ismail, n.

A Novel GA-FCM Strategy for Motion Learning and Prediction: Application in Wireless Tracking of Intelligent Subjects.

arabian journal of science and engineering . xx-xx. ISSN

93

Wang, Chenqing and Abdul Rahman, Azrul Azwan and Seliger, Gunther

A Case Study: Feasibility and economic analysis for advanced automation in spoke rim assembly for motorcycle towards sustainability.

In: Sustainable Manufacturing - Shaping Global Value Creation. Springer Berlin Heidelberg, pp. 387-392. ISBN 978-3-642-27289-9

Hits: 2595