CONFERENCE

NO

                     NAME

                                  TITLE

                              CONFERENCE

1

J. Abd. Razak, M.A. Mohd Salleh, N.A., Ibrahim, A.Fakhru’l Razi & A.R. Suraya

PP Filled MWCNTs Composites: The Effects of Lower Percentages of Filler Addition to the Mechanical and Morphological Properties.

International Conference on Composites and Nanomaterials (iC2MS). 5-7 August 2008. Melaka.

2

Taufik, Tan Soon Lam, Tajul Ariffin Abdullah

Design Improvement of Wheel Spacer

National Conference on Design & Concurrent Engineering 2008ISBN: 978-983-2948-54-4

3

Taufik, T.C. Kuah, Tajul Ariffin Abdullah

Design Improvement of Turbocharger using CFD

National Conference on Design & Concurrent Engineering 2008ISBN: 978-983-2948-54-4

4

Shajahan B. Maidin and Hazman B. Hasib and Taufik

Curriculum Structure of Degree Programme Offered by The Department of Manufacturing Design , Universiti Teknikal Malaysia Melaka

ICEPEE’08 – International Conference on Engineering Professional Ethics and Education

5

Taufik1, Tajul Ariffin Abdullah2

Design Improvement of Turbocharger using Genetic Algorithm

2nd International Conference on Science & Technology (ICSTIE), 12-13 December 2008, ISBN: 978-983-42204-2-6

6

Taufik, Shajahan b. Main, and Sivarao a/l Subramonian

Study on Design Optimization in Designing of Sheet Metal Part

MUCEET (Malaysian Technical Universities Conference on Engineering and TechnologyISBN: 978-967-5080-59-3

7

Taufik, and Tajul Ariffin Abdullah

Use of CFD for the Turbocharger Design

REACH 08ISBN: 978-983-2948-24-7.

8

Taufik, Tan Soon Lam and Tajul Ariffin.

Design Imrovement of Wheel Spacer.

National Conference of Design and Concurrent Engineering (DECON).

9

Taufik, T.C. Kuah and Tajul Ariffin.

Design Improvement of Turbocharger Using CFD.

National Conference of Design and Concurrent Engineering (DECON).

10

Saifudin Hafiz Yahaya, Muhammad Kamil Sued and Muhammad Hafidz Fazli Md. Fauadi.

Development of gear curve using an S-shaped transition curve.

National Conference of Design and Concurrent Engineering.

11

Saifudin Hafiz Yahaya, Jamaludin Md. Ali and Mohd Rizuan Baharon.

Vase design using transition curve application.

Simposium Kebangsaan Sains Matematik ke- 16

12

Saifudin Hafiz Yahaya, Shajahan Maidin and Muhammad Hafidz Fazli Fauadi.

Spur gear tooth design using spirals curve application.

Malaysian Technical Universities Conference on Engineering and Technology.

13

Muhammad Hafidz Fazli Md. Fauadi and Saifudin Hafiz Yahaya.

Modeling and simulation of PUMA industrial robot for automotive – related assembly process.

Fifth International Conference on Computer Graphics, Imaging and Visualization.

14

Muhammad Hafidz Fazli Fauadi, Zulkeflee Abdullah and Saifudin Hafiz Yahaya.

Generic process planning requirements for plastic mould manufacturing.

Malaysian Technical Universities Conference on Engineering and Technology.

15

Rohana Abdullah, Adi Saptari, Nor Akramin Mohamad, Isa Halim, Effendi Mohamad.

Simulation Modelling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line.

Proceeding of Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2008), Volume 2, pp. 520 – 525.  ISBN 978-983-42358-4-0.

16

Adi Saptari, Isa Halim, Seri Rahayu Kamat, Nor Akramin Mohamad,

Productivity Analysis at a Small and Medium Enterprises (SMEs) focusing on Work Study, Line Balance and Ergonomics

Proceeding of International Conference on Mechanical & Manufacturing Engineering (ICME 2008), pp.  1 – 9. ISBN  97-98-2963-59-2.

17

Radin Zaid Radin Umar, Nadia Ahmad, Isa Halim.

An Anthropometric Evaluation of Workstation Design: A Case Study in an Automotive Industry

Proceeding of National Conference on Design & Concurrent Engineering (DECON 2008), pp.  297 – 302. ISBN 9-789832-948544.

18

Isa Halim, Rohana Abdullah, Stanley Yong Thau Foong.

Assessment of Thermal Comfort at Classroom Environment: Subjective Measurement vs. Direct Technical Measurement.

Proceeding of International Conference on Environment (ICENV 2008), pp.  1 – 8. ISBN 9-789833-986392.

19

Adi Saptari, Effendi Mohamad, Loo Wei Khoing, 2008

“A process Capability and Cost Appraisal for Quality Control Problems A Case Study at Candy Manufacturer”

National Conference on Design & Concurrent Engineerin.

20

Adi Saptari, Nor Akramin Mohamad, Shee Chee Shen, 2008

“An Analysis of Jig Design to Assembly Time In Plug Assembly Line Using Design of Experiment”

National Conference on Design & Concurrent Engineering

21

Adi Saptari, Haeryip Sihombing, Mohd. Azlan Husin.

“Product Variation and Measurement Variation of Manufacturing Bolt Using Lathe Machine”

National Conference on Design & Concurrent Engineering 2008, 28th-29th October 2008

22

Adi Saptari, Shee Chee Shen, Abdul Rahman Mahmood, 2008

“Optimal Design of Jig and Assembly Process in Plug Assembly Line”

3rd Brunei International Conference, on Engineering and Technology

23

Effendi Mohamad, Mohd Razali Muhamad, Rohana Abdullah and Adi Saptari

A study on The Development of Key Performance Indicators (KPIs) At Aerospace Manufacturing Company

Journal Advanced Manufacturing Technology

24

Rohana Abdullah, Effendi Mohamad and Adi Saptari

Managing Key Performance Indicators (KPIs): A Case Study at an Aerospace Manufacturing Facility

KMICE, Langkawi

25

Rohana Abdullah, Adi Saptari, Isa Halim, Seri Rahayu Kamat, Nor Akramin Mohamad

Productivity Analysis at a Small and Medium Enterprises (SMEs) focusing on Work Study, Line Balance and Ergonomics

International Conference Mechanical & Manufacturing Engineering (ICME'08)

26

Rohana Abdullah, Adi Saptari, Isa Halim, Effendi Mohamad

Simulation Modelling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line

International Conference on Mechanical and Manufacturing Engineering (ICME)

27

Nursafarizah Abd Aziz, Nor Ratna Masrom and  Adi Saptari

“The Contribution of R&D Agencies in Exploring the Technology Transfer”

Asia Pacific Conference on Management of Technology and Technology Entrepreneurship

28

Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim

 “Analysis Workspace Design in Assembly line for Small Electric Industry”

Seminar Pencapaian Penyelidikan  UTeM (REACH’07)

29

Adi Saptari, and Zuhriah Ebrahim

“A Human Vision Sensitivity Analysis for Designing Better Human Machine Interface”

Seminar Pencapaian Penyelidikan  UTeM (REACH’07)

30

Nor Akramin Mohammad, Adi Saptari, Hazman Hasib

“An Attempt of Structuring Anthropometry Database Pilot Project of Malaysian Population for the Benefit of Industry”

Seminar Pencapaian Penyelidikan  UTeM (REACH’07)

31

Adi Saptari, and Zuhriah Ebrahim

“A Human Vision Sensitivity Analysis for Designing Better Human Machine Interface”

Malaysian Technical Universities Conference on Engineering and Technology

32

Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim

“Analysis Workspace Design in Assembly line for Small Electric Industry”

Seminar Pencapaian Penyelidikan  UTeM (REACH’07)

33

Wan Hasrulnizzam Wan Mahmood, Norhafiza Mohamed, 

The Effectiveness of Electronic Scheduling Template: Case Study on Composite Based Product’s Company

Proceeding: International Conference on Science and: Application s in Industry and Education ( ICSTIE 2008), Penang.

34

Wan Hasrulnizzam Wan Mahmood, Ab Rahman Mahmood, Ilyana Abdullah, 

Autonomous Maintenance Program For Job Base In Technical University

Proceeding: international Conference on the roles of the humanities and social sciences in engineering 2008 (ICOHSE 2008), KL

35

Wan Hasrulnizzam Wan Mahmood, Zuhriah Ebrahim and Effendi Mohamad

Development of an TPM Office for Lecturer’s Room”

Proceeding: National Management Conference 2008 (NAMAC), K. Terengganu. ISBN: 978-983-9842-32-6

36

Wan Hasrulnizzam Wan Mahmood, 

Lean Manufacturing: A Survey

Proceeding: Asia Pacific Conference on Management of Technology and Technology Entrepreneurship (APCMOTTE 2008), Melaka.

37

Wan Hasrulnizzam Wan Mahmood and Abdul Majid Ali.

Autonomous Maintenance for milling Machine

Proceeding: National Conference on design & Concurrent Engineering (DECON 2008),. Melaka. ISBN: 978-983-2948-54-4.

38

Wan Hasrulnizzam Wan Mahmood,

Industrial Types of manufacturing Complexity

Proceeding: National Seminar on Engineering and Technopreneurship (NSET 2008), Kuala Lumpur

39

Wan Hasrulnizzam Wan Mahmood and Ilyana Abdullah

Fuguai mapping: The useful Method for problem solving

Proceeding: Seminar Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, ISBN: 978-983-2948-33-9. Melaka

40

Wan Hasrulnizzam Wan Mahmood, Effendi Mohamad and Abd Rahman Abdullah, 

Enhancement Of An Effective Training In Manufacturing Company

Proceeding: Knowledge Management International Conference (KMICe, 08), , Langkawi, Kedah.

41

Wan Hasrulnizzam Wan Mahmood, 

Industrial Application Tools and Techniques in Lean Manufacturing and Total Quality Management

Proceeding: Knowledge Management International Conference (KMICe, 08), , Langkawi, Kedah.

42

Wan Hasrulnizzam Wan Mahmoodand Mohd Razali Muhamad, 

Industrial Application Of Lean Manufacturing

Proceeding: National Seminar on Science, technology and social science (STSS), Kuantan, Pahang. ISBN: 978-983-2607-17-5.

43

A.P. Puvanasvaran, M.H.M.A. Megat, Tang S.H, M.R, Rosnah, Muhamad, M.R, A.M.S. Hamouda 

People Development System To Enhance Problem Solving Capabilities In Implementing Lean Process Management: A Case Study In Aerospace Company

Proceedings of 6th International Conference on Manufacturing Research (ICMR 2008) , September 9-11, 2008, University Brunel, West London, ISBN 978-1-902316-60-4, Vol. 1., pp.253-272.

44

A.P. Puvanasvaran, M.H.M.A. Megat, Tang S.H, M.R, Rosnah, Muhamad, M.R, A.M.S. Hamouda  

People Development System To Enhance Problem Solving Capabilities In Implementing Lean Process Management: A Case Study In Aerospace Company

Proceedings Symposium on Engineering and Technology SET2008,  December15-16, 2008, Kuching, Sarawak, Malaysia, ISBN 978-983-43571-3-9, Vol 1, pp.44-66

45

Effendi Mohamad, Mohd Razali Muhamamad and Rohana Abdullah

Lean Manufacturing Implementation: A study on The Development of Key Performance Indicators (KPIs) At Aerospace Manufacturing Company

International Conference on Mechanical and Manufacturing Engineering (ICME) 21st -23rd May, 2008. ISBN: 9789832963592)

46

Effendi Mohamad, Rohana Abdullah,Wan Hasrulnizzam Wan Mahmood

“Communication Gap Analysis at Aersopace Manufacturing Company”,

Seminar Kebangsaan Kemahiran Insaniah & Kesejahteraan Social (SKIKS) , August 2008 (ISBN: 978-983-2948-33-9).

47

Effendi Mohamad, Rohana Abdullah,Wan Hasrulnizzam Wan Mahmood

“The Level of Achievement of Lean Manufacturing Implementation Status Before and After The Development of KPI’s at an Aerospace Manufacturing Company”

International Conference on The Roles of the Humanities and Social Sciences in Engineering 2008 (ICoSHE 2008), 5th -6th December2008.

48

Chong Kuan Eng, Mohamed K. Omar, Nooh Abu Bakar

Solving Assembly Line Balancing Problem using Genetic Algorithm with Heuristics-Treated Initial Population

The 2008 International Conference of Manufacturing Engineering and Engineering Management
London, U.K., 2-4 July 2008

49

Lokman Abdullah

Automated Color Sorting Robot For Recycling Application

International Conference on Mechanical Engineering    (ICME 08)

50

Lokman Abdullah

Design and Fabrication of a Pen Holder using Automated Color Sorting Robot

National Conference on Design and Concurrent Engineering. (DECON 08)

51

Z. Jamaludin, H. Van Brussel, J. Swevers

Design of a Disturbance Observer and Model-Based Friction Feedforward to Compensate Quadrant Glitches

The 9th International Conference on Motion and Vibration Control - MOVIC, Munich, Sept. 15-18

52

Z. Jamaludin, H. Van Brussel, J. Swevers

Quadrant Glitch Compensation using Friction Model-based Feedforward and an Inverse-Model-Based Disturbance Observer

Proc. of the 10th International Workshop on Advanced Motion Control, Trento, Italy, pp. 212-217.

53

Ahmad Rasdan Ismail, Azmi Hassan, Syamimi Shamsuddin, Mohd Zaki Nuawi, Shahrum Abdullah, Hairunnisa Mohamad Ibrahim

The Repeatability Analysis Of Industrial Robot Under Loaded Conditions And Various Distances

8th WSEAS International Conference On Robotics, Control And Manufacturing Technology

54

Syamimi binti Shamsuddin, Mohamad Firdhaus bin Mohamad Lajis

Performance Analysis of a Six-axis COMAU Robot

DECON 08

55

Mohd Hisham Nordin, Shariman Abdullah

Multiple Parts Orienting Method for Automated Assembly Process

International Conference on Mechanical and Manufacturing Engineering, (ICME 2008)

56

Nur Aidawaty Rafan, Umar Abdul Hannan

Design of PLC Controller for An Automated Parking System

Proceeding DECON 2008

57

Adnan Rachmat Anom Besari, Md.Dan bin Md.Palil, Ruzaidi bin Zamri, Anton Satria Prabuwono

A Review of Novel Sensing Techniques for AutomaticPolishing Robot System

DECON

58

Khairul Anuar A.Rahman, Anton Satria Prabuwono, Ruzaidi Zamri, A.Syukor Md.Jaya

Development of Intelligent Visual Inspection System

DECON

59

Saifudin Hafiz Yahaya, Mohammad Kamil Sued, Muhammad Hafidz Fazli Md. Fauadi

Development of Gear Curve Using an S-shape Transition Curve

National Conference on Design and Concurrent Engineering

60

M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan

The Effect of Cutting Speed and Coating Materials on Chip Morphology when Hard Turning AISI D2 Cold Work Tool Steel (60 HRC),

Proceedings of Conference On Manufacturing & Electronic Technology, Universiti Teknologi Malaysia

61

Khairul Anuar A.Rahman

Development of Intelligent Assembly Inspection System 

DECON

62

Khairul Anuar A.Rahman

Design and Development of an automated whiteboard.

SET (Symposium of Engineering Technology)

63

Liew Pay Jun and Mohd Razali bin Muhamad

Analysis of the influence of EDM parameters on surface roughness and surface hardness

3rd Brunei International Conference On Engineering And Technology ( Bicet)

64

Liew Pay Jun and Mohd Razali bin Muhamad

Effect of machining parameters in EDM of SKD 11 tool steel

Symposium on Engineering &Technology 2008

65

Masilla Kamalrudin, Sharmini Mohan, Liew Pay Jun and Rosmiza Wahida Abdullah

The mold cost estimation calculator for plastic injection mould manufacturing

3rd International Symposium on Information Technology

66

Liew Pay Jun ,Masilla Kamalrudin, Sharmini Mohan, Rosmiza Wahida Abdullah

Design consideration in machining and assembly process for plastic injection mould.

National Conference on design and concurrent engineering 2008

67

M.Mohd.Razali, B. Esmar, A.R. Md. Nizam

Investigation of chip characteristics of pvd tialn-coated WC insert in dry turning of AISI D2

Proceeding of Malaysian Metallurgical Conference (MMC 2008), 3-4 December 2008, Bangi, Malaysia

68

Thoguluva Raghavan Vijayaram

Manufacturing, Mechanical Properties and Microstructural Studies on Quartz particulate reinforced Aluminium-11.8% Silicon alloy matrix composite castings processed in a permanent metallic GCI mold by vortex mixing method

WFC 2008: World Foundry Congress 2008, 8 and 9th Feb 2008, India

69

Thoguluva Raghavan Vijayaram

Evaluation on the entrepreneurial skills of engineering students

ICEPEE 2008 International Conference, Kuala Lumpur, Malaysia, May 2008 organized by IEEE, Malaysia

70

Ryspek Usubamatov, Thoguluva Raghavan Vijayaram, A.Usubamatov

Reliability engineering on feeding systems in automatic machines of high production capacity

National Conference on Design and Concurrent Engineering 2008, DECON 2008, UTeM, Melaka, Malaysia, October 2008

71

Ryspek Usubamatov , Thoguluva Raghavan Vijayaram, F. Hamid, A.Usubamatov

Tolerances of linear, angular sized parts and feeders for reliable assembly processes in precision engineering

National Conference on Design and Concurrent Engineering 2008, DECON 2008, UTeM, Melaka, Malaysia, October 2008

72

Thoguluva Raghavan Vijayaram

Design and manufacturing of Fluka-Graphite Particulate Reinforced LM6 alloy Composites

National Conference on Design and Concurrent Engineering 2008, DECON 2008, UTeM, Melaka, Malaysia, October 2008

73

Thoguluva Raghavan Vijayaram

Technical Review on Rubber History, Technology of Rubber Processing and its Applications in Engineering

ICSTIE 2008 International Conference, Universiti Teknologi Mara, Pulau Pinang, Malaysia, December 2008

74

Sivarao, Thoguluva Raghavan Vijayaram, Intan Sharhida, Zurina Shamsudin

Creep characteristics of calcium carbonate particulated polyethylene matrix

ICSTIE 2008 International Conference, Universiti Teknologi Mara, Pulau Pinang, Malaysia, December 2008

75

Sivarao, Thoguluva Raghavan Vijayaram, Sivasankaran Nair

Automatic cutting fluid control in milling: Towards improved  tribology and economical manufacturing practice

ICSTIE 2008 International Conference, Universiti Teknologi Mara, Pulau Pinang, Malaysia, December 2008

 

                           JOURNAL

NO   

                     NAME

                                     TITLE

                              JOURNAL

1

M. I. Ojovan, J.M. Juoi, W.E. Lee and A. R. Boccaccini

Composite Materials for Nuclear and Hazardous Waste Immobilisation

Mat. Res. Soc. Sym. Proc. Scientific Basis for Nuclear Waste Management XXXI, V1107

2

J.M. Juoi, M.I. Ojovan and W.E. Lee

Microstructure and Leaching Durability of Glass Composite Wasteforms for Spent Clinoptilolite Immobilisation

J. Nucl. Mater.,372(2-3)

3

M I Ojovan, J M Juoi, W E Lee

Application of glass composite materials for nuclear waste immobilization

J Pak. Mater Soc, 2(2)

4

J. Abd. Razak, M.A. Mohd Salleh, N.A. Ibrahim, A. Fakhru’l Razi and A.R. Suraya

The Influences of Melt-Compounding Parameters on the Tensile Properties of Low Filler Loading of Untreated-MWCNTs-Polypropylene (PP) Nanocomposites

Journal of Engineering Science and Technology. Vol. 3, No. 1, 97-108.

5

Saifudin Hafiz Yahaya, Jamaludin Md Ali and Muhammad Hafidz Fazli Md. Fauadi.

A product design using an S-shaped and C-shaped transition curves.

IEEE Xplore.

6

Effendi Mohamad, Mohd Razali Muhamamad, Rohana Abdullah and Adi Saptari

A study on The Development of Key Performance Indicators (KPIs) At Aerospace Manufacturing Company,

ournal Advanced Manufacturing Technology, Page 1-17 ,Volume 2 , July – December 2008 .( ISSN :1985-3157)

7

Effendi Mohamad, Rohana Abdullah,Wan Hasrulnizzam Wan Mahmood,

“Communication Gap Analysis at Aersopace Manufacturing Company”,

Journal of Human Capital Development. (ISSN:1985-7012) Volume 1.0 2008.

8

A.P. Puvanasvaran, M.H.M.A. Megat, Tang S.H, Muhamad, M.R, A.M.S. Hamouda  

A Review of Problem Solving Capabilities in Lean Process Management

American Journal of Applied Sciences Vol.5 No. 5, 2008, ISSN 1546-9239 © 2008 Science Publications, pp.504-511

9

A.P. Puvanasvaran, B.H. Tan, M.H.M.A. Megat, Tang S.H, Muhamad, M.R, A.M.S. Hamouda

Degree Of Leanness And Managerial Commitment In An Aerospace Company

Journal of Statistics and Management System, Vol. 11, No. 4, pp. 653–673, ISSN 0972-0510, Taru Publications, 2008, India

10

A.P. Puvanasvaran, Ooi, M.H.M.A. Megat, Tang S.H, Muhamad, M.R, A.M.S. Hamouda

Lean Behavior Among Employees In Aerospace Company

Journal of Productivity, National Productivity Centre, 2008, Petaling Jaya, Malaysia, Vol. 25 pp.29-44.

11

Ayu Bidiawati J.R., Mohd Lair, Noor Ajian

Effect of cost increment distribution patterns on the performance of JIT supply chain

Journal Teknik Industri, Vol. 10, No 1, June 2008: page 65-73

12

Z. Jamaludin, H. Van Brussel (1), G. Pipeleers, J. Swevers

Accurate Motion Control of XY High-Speed Linear Drives using Friction Model Feedforward and Cutting Forces Estimation

Annals of the CIRP-Manufacturing Technology, vol. 57/1, pp 403-406.

13

Z. Jamaludin, H. Van Brussel, J. Swevers

Disturbance compensation for machine tools with linear motor drives

PhD DissertationISBN: 978-90-5682-975-9

14

Ahmad Rasdan Ismail, Azmi Hassan , Syamimi Shamsuddin, Mohd Zaki Nuawi, Mohd Nizam Ab Rahman

The Performance Analysis Of Industrial RobotUnder Loaded Conditions And Various Distance

International Journal Of Mathematical Models And Methods In Applied Sciences

15

N. I. S. Hussein, I. R. Pashby, and D. G. McCartney

Laser and arc weld method for direct metal deposition of Waspaloy – the study of microstructures and mechanical properties

Int. J. Manufacturing Technology and Management

16

N. I. S. Hussein, J. Segal, D. G. McCartney, and I. R. Pashby

Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire

Materials Science and Engineering A 497

17

M.A. Kamely, M.Y. Noordin, A. Ourdjini, V.C. Venkatesh

The Effectiveness of Coatings when Turning Hardened Cold Work Tool Steel AISI D2 (60 HRC), International Journal of Machining and Machinability of Materials

International Journal of Machining and Machinability of Materials 2008-Vol. 4(1), 63-75

18

M.A. Kamely, M.Y. Noordin, A. Ourdjini, M.M. Razali

The influence of Cutting Tool Material on Surface Integrity When Turning of Hardened AISI D2 Cold Work Tool Steel (60 HRC)

Submitted to IJMPT Jun 2008

19

M.A. Kamely, M.Y. Noordin, A. Ourdjini, V.C. Venkatesh

Low Cost Alternative Cutting Tools when Hard Turning of AISI D2 Cold Work Tool Steel (60 HRC)

Journal of Advance Manufacturing Technology (JAMT) 2008 – Vol. 2(2), 29 - 37.

20

M.Mohd.Razali, B. Esmar, A.R. Md. Nizam

Investigation of chip characteristics of pvd tialn-coated WC insert in dry turning of AISI D2

STEEL Solid State Science and Technology, Vol. 16, No 1 (2008) 1-7ISSN 0128-7389

21

Thoguluva Raghavan Vijayaram, Sivarao

Surface Finish Investigation on Anchor Shaped Lead Castings

Indian Foundry Journal, IFJ, Kolkata, India, July 2008

22

Thoguluva Raghavan Vijayaram

Energy conservation methods in foundries

Indian Foundry Journal, IFJ, August 2008.

23

Thoguluva Raghavan Vijayaram

Manufacturing of Fluka-Graphite Particulate Reinforced Aluminium - 11.8% Silicon Alloy Composite Castings

Foundry Journal, September-October issue 2008.

24

Thoguluva Raghavan Vijayaram

Effect of Pressure on Mechanical Properties and Microstructure during the Solidification Processing of LM6 Alloy

Indian Foundry Journal, Kolkata, India, November 2008.

25

Thoguluva Raghavan Vijayaram

Foundry Science of Casting Solidification and Simulation Technology

Foundry Journal, Volume. XX, No.6, November – December 2008

26

Thoguluva Raghavan Vijayaram

Engineering Facts on Cast Iron

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/engineering facts on cast iron.shtml, 25 January 2008

27

Thoguluva Raghavan Vijayaram

Metallurgical Features of Steel

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/metallurgical_features_ of_steel.shtml, 4 March 2008

28

Thoguluva Raghavan Vijayaram

Application Potential of Copper and Copper Alloys in Metallurgical Engineering Industries

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/application potential of copper and copper alloys in metallurgical engineering industries.shtml, 28 May 2008

29

Thoguluva Raghavan Vijayaram

Aluminium and Aluminium Alloys (Wrought and Casting Alloys): Light Weight Engineering Materials for Industrial Applications

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/aluminium and aluminium_alloys.shtml, 6 May 2008

30

Thoguluva Raghavan Vijayaram

Mechanical Properties, Advantages, and Emerging Applications of Maraging Steels

The Metallurgist, UK,  http://www.themetallurgist.co.uk/ articles/maraging steels.shtml, 7 June 2008

31

Thoguluva Raghavan Vijayaram

Titanium and Titanium Alloys: Key Engineering Materials for Aerospace Applications

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/titanium and_titanium alloys key engineering materials for aerospace applications.shtml, 2 July 2008

32

Thoguluva Raghavan Vijayaram

Rubber: An Effective and Suitable Elastomer for Manufacturing Engineering and Metal Working Industries

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/rubber an effective and  suitable elastomer for manufacturing engineering and metal working industries.shtml, 3 August 2008

33

Thoguluva Raghavan Vijayaram

Advances in Diamond Coating Technology

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/advances in_diamond coating_technology.shtml, 16 August 2008

34

Thoguluva Raghavan Vijayaram

Electroforming Technology: An Advanced Manufacturing Process for metal Fabrication

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/electroforming technology an_advanced_manufacturing process for metal fabrication.shtml, 22 August 2008

35

Thoguluva Raghavan Vijayaram

Microgravity Solidification Technology

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/microgravity solidification technology.shtml, 10 September 2008

36

Thoguluva Raghavan Vijayaram

Metallurgical aspects of powder coating technology, advantages, and applications

The Metallurgist, UK, http://www.themetallurgist.co.uk/ articles/metallurgical aspects of powder_coating.shtml, 06 October 2008

Hits: 2094