CONFERENCE

NO

                   NAME

                                 TITLE

                            CONFERENCE

1

J.M Juoi and M. I. Ojovan

Characterisation and Durability of Glass Composite Wasteforms Immobilising Spent Clinoptilolite

Proc. WM’07, February 25-March 1, Tucson, AZ.

2

M. I. Ojovan, J. M. Juoi and W. E. Lee

Glass Composite Materials for Nuclear Waste Immobilisation

ICG, July 1- 6, Strasbourg, France.

3

J. Abd. Razak, M.A., Mohd Salleh, N.A., Ibrahim, A. Fakhru’l Razi & A.R. Suraya

Effects of Very Low wt.% Addition of Untreated-MWCNTs-PP Matrix Polymer Nanocomposites to the Mechanical and Thermal Properties

World Engineering Congress. 5-9 August 2007. Penang.

4

J. Abd. Razak, M.A., Mohd Salleh, N.A., Ibrahim, A. Fakhru’l Razi & A.R. Suraya

Effects of Stearic Acid Addition to the Tensile Properties of Low Filler Loading untreated-MWCNTs-Polypropylene (PP) Nanocomposites

VIIth National Symposium on Polymeric Materials. 26-27 November 2007. Kuala Lumpur.

5

J. Abd. Razak, M.A., Mohd Salleh, N.A., Ibrahim, A. Fakhru’l Razi & A.R. Suraya

The Influences of Melt Compounding Parameters to the Tensile Properties of Low Filler Loading of Untreated-MWCNTs-Polypropylene (PP) Nanocomposites

21st Symposium of Malaysian Chemical Engineers. 12-14 December 2007. UPM Serdang.

6

Taufik, T.S. Beh, Shajahan b.Maidin

Design and Development of LED Bending Machine Fixture

World Engineering Congress 2007ISBN 978-983-43571-0-8

7

Taufik, Shajahan Maidin

Design of Sheet Metal Part using Design for Manufacture

Conference on Applications and Design in Mechanical Engineering  ISBN: 978-983-42358-3-3

8

Taufik, Shajahan Maidin, Sivarao

Design Rules Optimization in Designing of Sheet Metal Part

REACH 07ISBN: 978-983-2948-24-7.

9

Sivarao, Taufik

Design and Development of an Automobile Brake Lining Monitoring System

International Conference on Engineering & ICT, ISBN: 978-983-2948-22-3

10

Sivarao, Rahim, Taufik, Ammar

Comparative Quality Investigation of Rolled and Flat Carbon Steel Plates in Drilling

International Conference on Engineering & ICT, ISBN: 978-983-2948-22-3

11

Saifudin Hafiz Yahaya and Jamaludin Md. Ali.

A piecewise C1 rational Bezier cubic like interpolation in visualizing a scientific data.

2nd Regional Conference on Ecological and Environmental Modeling.

12

Saifudin Hafiz Yahaya and Jamaludin Md. Ali.

C-shaped Bezier-like transition curves of two circles.

Simposium Kebangsaan Sains Matematik ke-XV.

13

Mohd Razali Mohamad, Esmar Budi,  Saifudin Hafiz Yahaya and Md. Nizam Abd Rahman.

Modeling of the substrate bias effect in reactive sputtering.

International Conference on Engineering and ICT.

14

I., Halim, A. R., Omar, M. H., Maslan.

Assessment of Thermal Comfort Measurement in Working Environment of Malaysian Manufacturing Industry

Proceeding of AEESEAP Regional Symposium on Engineering Education 2007, University of Malaya, Kuala Lumpur.  ISBN 978-983-42035-3-5.

15

Isa Halim, Adi Saptari, Seri Rahayu Kamat, Wan Hasrul Wan Mahmood

Assessment of Workstation Design for Safe Working Posture at Plug Assembly Line.

Proceeding of International Conference on Engineering and ICT (ICEI 2007), Volume 1, pp.  183 – 190. ISBN 9-789832-948223.

16

Adi Saptari, Seri Rahayu Kamat, Wan Hasrul Wan Mahmood, Isa Halim.

Optimum Workspace Design in a Plug Assembly Line

Proceeding of International Conference on Engineering and ICT (ICEI 2007), Volume 1, pp.  155 – 162. ISBN 9-789832-948223.

17

Isa Halim, Adi Saptari, Seri Rahayu, Rohana Abdullah, Nor Akramin.

Measurement of Thermal Comfort at Working Environment in Manufacturing Industry

Proceeding of International Conference on Ergonomics 2007 (ICE 2007), pp.  207 – 212. ISBN 978-983-2085-91-1.

18

Isa Halim, Adi Saptari, Seri Rahayu Kamat, Rohana Abdullah, Nor Akramin Mohamad”

Measurement of Thermal Comfort in Workplace Using Direct Technical Method: A Case Study in Manufacturing Industry”

International Conference of Ergonomic

19

Seri Rahayu Kamat, Adi Saptari

“A Study Of Human Pinching/Griping Strength For the purpose of Hand tools Design”

International conference of Ergonomic

20

Isa Halim, Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood

“Working Posture Assessment on A plug Assembly Line”

International Conference on Engineering and ICT

21

Adi Saptari, Zuhriah Ebrahim

“A Study of Flicker Fusion Threshold for Malaysian Population”

International Conference of Ergonomic

22

Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim

Optimum Workspace Design in A Plug Assembly line

International Conference on Engineering and ICT

23

Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim

“A Plug Assembly Line: An Assessment of Workstation Design and Working Posture

Journal of Biomechanics, Volume 40, Supplement 2

24

Rohana Abdullah, Adi Saptari, Isa Halim, Seri Rahayu Kamat

”Capacity Characterization and Productivity Improvement Study Utilizing Simulation”

The Malaysian Research Group, International Conference.

25

Wan Hasrulnizzam Wan Mahmood, Mohd Razali Muhamad, Mohd Irman Ramli

Industrial Application of Value Stream Mapping in Developing Best Practices For Productivity Improvement

Proceeding: World Engineering Congress 2007. Penang.

26

Mohd Irman Ramli, Mohd Hadzley Abu Bakar, Wan Hasrulnizzam Wan Mahmood, Mohamad Razif Baharudin

Analysis The Performance Evaluation Between Oil Based Coolant And Bio-Degradable Based Coolant On Cutting Surface In Turning Operation

Proceeding: World Engineering Congress 2007. Penang

27

A.P. Puvanasvaran, Muhamad, M.R, M.H.M.A. Megat,Tang S.H, A.M.S. Hamouda  

People Development System to Enhance Problem Solving Capabilities in Lean Process Management

Proceedings of World Engineering Congress, 2007, International Conference on Manufacturing Engineering , August 28-30, 2007, Penang, Malaysia, ISBN 978 - 983 - 43571 - 0 - 8 ©2007 FEIIC, pp.416-422.

28

A.P. Puvanasvaran, Rohana Abdullah, M.H.M.A. Megat, Tang S.H, Muhamad, M.R, A.M.S. Hamouda

Lean Process Management as a Company Strategy to be a Cost Competitive: A Case Study in a Lean Aerospace Company

Proceedings of International Conference on Enginering and ICT (ICEI 2007) , November 27-28, 2007, Melaka, Malaysia, ISBN 978 - 983 - 2948 - 22 - 3 ©2007 Universiti Teknikal Malaysia Melaka , pp.27-31.

29

A.P. Puvanasvaran, Rohana Abdullah, M.H.M.A. Megat, Tang S.H, Muhamad, M.R, A.M.S. Hamouda

Degree Of Leanness And Managerial Commitment In An Aerospace Company

Proceedings of International Conference on Enginering and ICT (ICEI 2007) , November 27-28, 2007, Melaka, Malaysia, ISBN 978 - 983 - 2948 - 22 - 3 ©2007 Universiti Teknikal Malaysia Melaka , pp.27-31.

30

Mohd Lair, Noor Ajian, Luong, Lee, Marian, Romeo

Centralised Supply Chain Scheduling

Proceedings of the 5th International Conference on Supply Chain Management and Information Systems 2007, December 2007, Melbourne, Australia

31

Bong Cheng SiongChong Kuan Eng

Managing Work in Progress in Production Control

World Engineering Congress 2007,7-9 August 2007, Penang

32

T.Zahari, R. Nur Aidawaty, A.Shariman, A.R. Muhammad Arfauz

Development of Motion Control User Interface for an XY Table

Proceeding ICEI 2007

33

Mohd Irman b. Ramli

Performance Analysis of Cutting Fluid during Milling Operation: Study on Effect of Milling Work Surface

ICEI 2007,Melaka, organized by UTeM

34

Mohd Irman b. Ramli

Analyze the Performance Evaluation of Coolants in Turning Operation: Study on Effect of Cutting Surface

WEC 2007, Penang, organized by UPM

35

Wan Hasrulnizam b. Wan Mahmood,Mohd Irman b. Ramli

Industrial Application of Value Stream Mapping in Developing Best Practices for Productivity Improvement

WEC 2007, Penang, organized by UPM

36

N. I. S. Hussein, D. G. McCartney, I. R. Pashby, and J. I. Segal

Heat flow and structural development during direct metal deposition of Waspaloy wire using a high power diode laser

ICALEO (The International Congress on Applications of Lasers & Electro-Optics), Orlando, USA

37

N. I. S. Hussein, D. G. McCartney, and I. R. Pashby

Direct metal deposition of superalloy using wire feed: a comparison of laser and arc-based processes

ICRM (International Conference on Responsive Manufacturing), Nottingham, UK

38

I. R. Pashby, G. Bi, J. Segal, and N. I. S. Hussein

Deposition of Nickel base Waspaloy via High Power Lasers

LIM (Lasers in Manufacturing), Munich, Germany

39

Liew Pay Jun and Mohd Razali bin Muhamad

A study of EDM machining parameters on SKD 11 tool steel using DOE

National Metallurgical Conference 2007

40

Lok, Y.Y., Amin, N., Pop, I. and Ingham, D.B.

Unsteady Boundary Layer Flow Induced by Accelerating Motion near a Forward Stagnation point in a Micropolar Fluid

Proceedings of the 5th  International Conference on Computational Heat and Mass Transfer

41

M.Mohd. Razali, B. Esmar, A.R.Md. Nizam,

Surface finish of AISI D2 steel in dry turning with TiAlN-coated WC insert

Proceeding of Malaysia National Metallurgical Conference (NMC 2007), 26th & 27th November 2007,Johor Bahru, Malaysia

42

M.Mohd.Razali, B. Esmar, Y.Saifudin Hafiz, A.R. Md. Nizam

Modeling of the Substrate Bias Effect in Reactive Sputtering

Proceeding of International Conference on Engineering and ICT, 27-28 November 2007, Melaka, Malaysia

43

M.Mohd.Razali, B. Esmar, A.R. Md. Nizam

Characterization of Surface Finish in Turning of AISI D2 Steel With TiAlN-coated WC Insert

Proceeding of International Conference on Engineering and ICT, 27-28 November 2007, Melaka, Malaysia

44

Mohd Shukor Bin Salleh, Mohd Irman Ramli

Performance analysis of cutting fluid during milling operation : Study on effect of milling work

ICEI 2007, Melaka,organized by UTeM

45

S.Sulaiman, Thoguluva  Raghavan  Vijayaram, R.Samin, MMHM.Ahmad

Squeeze casting technique for processing light metals, alloys, and metal matrix composites

World Engineering Congress 2007, Pulau Pinang, 5-9 August 2007, Malaysia

46

Thoguluva Raghavan Vijayaram

Foundry metallurgy of LM6 alloy matrix hybrid composite castings processed in permanent metallic copper mold

National Metallurgical Conference, NMC 2007, Organized by UTM, Skudai, Puteri Pacific Hotel, November 2007, Johor Bahru, Malaysia

47

Thoguluva Raghavan Vijayaram, B. Ramesh Bapu

Production and Characterization of 12% Titanium Carbide Particulate Reinforced Aluminum-11.8 % Silicon Alloy Matrix Composite Castings Processed by Vortex Method - Liquid Metallurgy Route for Aerospace Applications

ECHDEM 2007, International Conference on “Emerging Challenges in Design and Manufacturing Technologies”, Proceedings, organized by Sathyabama University, Chennai, India & Combat Vehicles Research and Development Establishment, India, 28 to 30 November 2007

 

                          JOURNAL

NO

                    NAME

                                 TITLE

                                JOURNAL

1

J.M. Juoi, M.I. Ojovan

The Effect of Waste Loading on the microstructure of Glass Composite Wasteforms for the Immobilisation of Spent Clinoptilolite

European Journal of  Glass  Science and Technology Part A V48, 124-19

2

J. Abd. Razak, H. Md. Akil, Huilin Ong

Effect of Inorganic Fillers on the Flammability Behavior of Polypropylene Composites

Journal of Thermoplastic Composite Materials. Vol. 20, No. 2, 195-205.

3

Adi Saptari, Seri Rahayu Kamat, Wan Hasrul Wan Mahmood, Isa Halim

A Plug Assembly Line: An Assessment of Workstation Design and Working Posture.

Journal of Biomechanics, Volume 40, Supplement 2, pp. 152.

4

Z. Jamaludin, H. Van Brussel, J. Swevers

Classical Cascade and Sliding Mode Control Tracking Performances for a X-Y Feed Table of a High-Speed Machine Tools

Int. J. Precision Technology, vol.1/1, pp. 65-74.

5

M.A. Kamely,  M.Y. Noordin, V.C. Venkatesh

The Effect of Multiple Pass Cutting on Surface Integrity When Hard Turning Of AISI D2 Cold Work Tool Steel

Int. J. Precision Technology, Vol. 1(1),  97-105

6

Lok, Y.Y., Amin, N. and Pop, I

Mixed Convection Flow Near a Non-Orthogonal Stagnation Point Towards a Stretching Vertical Plate

International Journal of Heat and Mass Transfer, vol.50, p4855-4863

7

Lok, Y.Y., Pop, I. and Chamkha, Ali

Non-orthogonal Stagnation Point Flow of a Micropolar Fluid

International Journal of Engineering Science, vol.45, p173-184

8

Lok, Y.Y., Amin, N. and Pop, I

Comments on: “Steady Two-dimensional Oblique Stagnation-Point Flow Towards a Stretching Surface” M. Reza and A.S. Gupta, Fluid Dynamics Research 37 (2005) 334-340

Fluid Dynamics Research, vol.39, p505-510

9

Lok, Y.Y., Amin, N. and Pop, I

Unsteady Boundary Layer Flow of a Micropolar Fluid near a Stagnation Point with Uniform Suction or Injection

Jurnal Teknologi, vol.46(C), p15-32

10

Thoguluva Raghavan Vijayaram, Shamsuddin Sulaiman, AMS Hamouda, MHM Ahmad

Processing, properties and metallographic studies of combined tungsten carbide and aluminium silicate particulate reinforced aluminium-11.8% silicon alloy matrix hybrid composite castings

Indian Foundry Journal, ,volume 53, number:2, pp: 33-41, February 2007

11

Thoguluva Raghavan Vijayaram and Ryspek Usubamatov

Quality machining of straight tooth bevel gears to avoid tooth profile deviation based on an analytical approach solution

Journal of technology management & entrepreneurship, JTME, UTeM, Malaysia, Vol 6  2007

12

AMS Hamouda, S.Sulaiman, Thoguluva Raghavan Vijayaram, M.Sayuti, MHM.Ahmad

Processing and Characterization of particulate reinforced aluminium silicon matrix composite

JAMME, Journal of  achievements in materials and manufacturing engineering, Volume 25, Issue2, December 2007

Hits: 1938